Giriş

This guide will help you replace the wireless card in an HP Color LaserJet Pro MFP M277dw. You will need a plastic opening tool and a Phillips #2 screwdriver head.

  1. Remove paper tray by pulling it straight out.
    • Remove paper tray by pulling it straight out.

    • The tray should just slide out with little to no resistance.

  2. Pro Tech Toolkit içeren veya $100tüm siparişlerde ücretsiz kargo!

    Mağazamıza Göz Atın
  3. Lower the back panel by pulling it down from the upright position. Remove one Phillips #2 10mm screw. Use the plastic opening tool to remove the left side panel.
    • Lower the back panel by pulling it down from the upright position.

    • Remove one Phillips #2 10mm screw.

    • Use the plastic opening tool to remove the left side panel.

    • Flipping the printer onto its side makes it easier to remove the panel and access the motherboard.

  4. Remove one Phillips #2 11mm screw. Remove the wireless card.
    • Remove one Phillips #2 11mm screw.

    • Remove the wireless card.

    • The wireless card is connected to the circuit board with pins, it will take a bit of force to remove it.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Christopher Fahey

Üyelik tarihi: 08-10-2018

528 İtibar

3 adet Kılavuz yazıldı

Takım

Cal Poly, Team S4-G2, White Fall 2018 Cal Poly, Team S4-G2, White Fall 2018 üyesi

CPSU-WHITE-F18S4G2

3 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 Gün: 5

Son 30 Gün: 28

Her zaman: 115