Eşyalarını Tamir Et Topluluk Mağaza

HP Compaq 2510p RAM Replacement

Giriş

This guide requires only two screws to be removed with Phillips head screwdriver. Once the panel is removed, the ram can easily be pulled out.

Neye ihtiyacın var

  1. HP Compaq 2510p RAM Replacement, RAM: adım 1, 1 resimden 1.

    • Flip the device over so the back panel is facing upwards. Locate the RAM plate cover towards the left side of the laptop. There will be two screws located on the panel.

    Düzenle

  2. HP Compaq 2510p RAM Replacement: adım 2, 1 resimden 1.

    • Remove both screws holding the RAM cover plate in place using your Phillips Screwdriver.

    Düzenle

  4. HP Compaq 2510p RAM Replacement: adım 3, 1 resimden 1.

    • Remove the cover plate by lifting upwards once screws are removed.

    Düzenle

  5. HP Compaq 2510p RAM Replacement: adım 4, 1 resimden 1.

    • Carefully release the pins that are securing the RAM in place by pushing in a outward motion, away from the RAM.

    • Be sure to ground yourself before touching the RAM.

    • Be gentle when releasing the pins.

    Düzenle

  6. HP Compaq 2510p RAM Replacement: adım 5, 1 resimden 1.

    • Remove the old RAM by lifting it upwards, then pulling.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

3 farklı kişi bu kılavuzu tamamladı.

Yazar

2 tane daha katılımcı ile

Nathan Pereira

Üyelik tarihi: 10/26/16

81 İtibar

1 Kılavuz yazıldı

Rozetler: 5

+2 tane daha rozet

Ekip

UMass Dartmouth, Team 3-8, Isaacson Fall 2016 UMass Dartmouth, Team 3-8, Isaacson Fall 2016 üyesi

UMASSD-ISAACSON-F16S3G8

3 Üyeler

5 adet Kılavuz yazıldı

0Kılavuz Yorumları

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 13

Her zaman: 895