Giriş

Does the printer button not work or stay on when you are trying to turn the printer off? Use this guide to replace the malfunctioning button. This will ensure that you have a working printer that will actually print.

Parçalar

Hiçbir parçaya gerek yok.

  1. Remove the back two 14.0 mm Torx #10 screws.
    • Remove the back two 14.0 mm Torx #10 screws.

  2. Lay the printer on its back.
    • Lay the printer on its back.

    • Grab the paper tray by its right side and pull it to the left and up.

  3. Open the frontal access panel by lifting it from the top.
    • Open the frontal access panel by lifting it from the top.

    • Similar to the paper tray, grab it from the right side and pull it to the left and up.

  4. Pro Tech Toolkit içeren veya $100tüm siparişlerde ücretsiz kargo!

    Mağazamıza Göz Atın
  5. Take out the two frontal 14.0 mm Torx #10 screws. Carefully lift the frontal cover. Don't lift it up aggressively. A strip will be attached to it.
    • Take out the two frontal 14.0 mm Torx #10 screws.

    • Carefully lift the frontal cover.

    • Don't lift it up aggressively. A strip will be attached to it.

  6. Remove the strip that connects the printer to the front cover.
    • Remove the strip that connects the printer to the front cover.

  7. Remove the two 13.0 mm Torx #10 screws. Carefully lift it up. The button will be located under it.
    • Remove the two 13.0 mm Torx #10 screws.

    • Carefully lift it up. The button will be located under it.

  8. Lift up the power button.
    • Lift up the power button.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Justin Taiki Fukada

Üyelik tarihi: 25-01-2014

798 İtibar

7 adet Kılavuz yazıldı

Takım

Cal Poly, Team 1-41, Maness Winter 2014 Cal Poly, Team 1-41, Maness Winter 2014 üyesi

CPSU-MANESS-W14S1G41

4 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 1

Son 30 Gün: 12

Her zaman: 699