Ana içeriğe geç

Giriş

The panel is what holds the screen in place. Before removing the panel make sure the printer is unplugged.

Parçalar

Hiçbir parça belirtilmedi.

  1. Lift up printer screen.
    • Lift up printer screen.

  2. Use the Metal Spudger from the IFIXIT Toolkit to pry the left corner of the front panel. Slowly pry the front panel by sliding the Metal Spudger along the border of the front panel. Slowly pry the front panel by sliding the Metal Spudger along the border of the front panel.
    • Use the Metal Spudger from the IFIXIT Toolkit to pry the left corner of the front panel.

    • Slowly pry the front panel by sliding the Metal Spudger along the border of the front panel.

  3. Remove the front panel by lifting each corner up. Replace the front panel.
    • Remove the front panel by lifting each corner up.

    • Replace the front panel.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Elizabeth Surface

Üyelik tarihi: 26-08-2015

1.386 İtibar

9 adet Kılavuz yazıldı

Takım

USF Tampa, Team 4-6, Meier Fall 2015 USF Tampa, Team 4-6, Meier Fall 2015 üyesi

USFT-MEIER-F15S4G6

4 Üyeler

9 adet Kılavuz yazıldı

Bir Yorum

My HP Envy 5530 had a screw hidden beneath the label on the right side of the front panel. I used a knife to lift the label to access the screw.

rndymike - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 7

Son 30 Gün: 21

Her zaman: 352