Eşyalarını Tamir Et Topluluk Mağaza
Onarım Topluluğuna Katılın - Hesap Oluşturun

HP Envy 5660 Scanner Piece Replacement

Giriş

The scanner piece is a part of the printer that scans over a paper. It may become misaligned or damaged over time. This guide will help a user replace the scanning piece.

Neye ihtiyacın var

  1. HP Envy 5660 Scanner Piece Replacement, Scanner Glass: adım 1, 1 resimden 1.

    • Open the cartridge access area.

    Düzenle
    FixBot'a Sor

  2. HP Envy 5660 Scanner Piece Replacement: adım 2, 1 resimden 1.

    • Remove the three 11.5 mm screws with a T10 bit.

    Düzenle
    FixBot'a Sor

  3. HP Envy 5660 Scanner Piece Replacement: adım 3, 3 resimden 1. HP Envy 5660 Scanner Piece Replacement: adım 3, 3 resimden 2. HP Envy 5660 Scanner Piece Replacement: adım 3, 3 resimden 3.

    • Locate the cover hinge on the right side of the printer.

    • Pull the hinge off of the scanner to allow the scanner to open to 90 degress.

    Düzenle
    FixBot'a Sor

  5. HP Envy 5660 Scanner Piece Replacement: adım 4, 2 resimden 1. HP Envy 5660 Scanner Piece Replacement: adım 4, 2 resimden 2.

    • Remove the 12 mm screws on the left side of the printer with a T10 bit.

    Düzenle
    FixBot'a Sor

  6. HP Envy 5660 Scanner Piece Replacement: adım 5, 2 resimden 1. HP Envy 5660 Scanner Piece Replacement: adım 5, 2 resimden 2.

    • Remove the 11.5 mm screw with a T10 bit to release the spring-loaded hinge.

    • Since this is a compression spring, the hinge will snap downwards as soon as it is loosened.

    Düzenle
    FixBot'a Sor

  7. HP Envy 5660 Scanner Piece Replacement: adım 6, 3 resimden 1. HP Envy 5660 Scanner Piece Replacement: adım 6, 3 resimden 2. HP Envy 5660 Scanner Piece Replacement: adım 6, 3 resimden 3.

    • Pull the plastic side cover off of the printer.

    • You may need to lift the printer and push the cover downwards as it is latched onto the bottom of the printer.

    • Plastic opening tools or a metal spudger may also be used.

    Düzenle
    FixBot'a Sor

  8. HP Envy 5660 Scanner Piece Replacement: adım 7, 1 resimden 1.

    • Remove the five 11.5 mm screws located at the bottom of the scanner.

    • Steps 3-6 were intended to create easier access to these screws. However, they will still be difficult to reach.

    • The top of the scanner will now easily pull off.

    Düzenle
    FixBot'a Sor

  9. HP Envy 5660 Scanner Piece Replacement: adım 8, 2 resimden 1. HP Envy 5660 Scanner Piece Replacement: adım 8, 2 resimden 2.

    • Pry the old scanning glass up with a metal spudger.

    • There are adhesives under the scanning glass. Be careful not to break the glass while removing it.

    Düzenle
    FixBot'a Sor

  10. HP Envy 5660 Scanner Piece Replacement, Scanner Piece: adım 9, 3 resimden 1. HP Envy 5660 Scanner Piece Replacement, Scanner Piece: adım 9, 3 resimden 2. HP Envy 5660 Scanner Piece Replacement, Scanner Piece: adım 9, 3 resimden 3.

    • The scanning piece is located in the bottom half of the scanner that was not separated from the printer.

    • Lift the scanning piece and detach the ribbon cable by gently pulling on it.

    Düzenle
    FixBot'a Sor
Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Yazar

2 tane daha katılımcı ile

Ryan Steakley

Üyelik tarihi: 01/23/18

790 İtibar

5 adet Kılavuz yazıldı

Rozetler: 10

+7 tane daha rozet

Ekip

Cal Poly, Team S1-G6, Livingston Winter 2018 Cal Poly, Team S1-G6, Livingston Winter 2018 üyesi

CPSU-LIVINGSTON-W18S1G6

4 Üyeler

10 adet Kılavuz yazıldı

0Kılavuz Yorumları

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 13

Son 30 gün: 60

Her zaman: 1,397