Ana içeriğe geç

HP Envy 700-030qe RAM Replacement

Neye ihtiyacın var

  1. HP Envy 700-030qe RAM Replacement, RAM: adım 1, 3 resimden 1. HP Envy 700-030qe RAM Replacement, RAM: adım 1, 3 resimden 2. HP Envy 700-030qe RAM Replacement, RAM: adım 1, 3 resimden 3.
    • Make sure that you are wearing your anti-static wristband. This will prevent damaging any internal parts with any built up static electricity.

    • Unscrew the 10.5mm screw on the left of the desktop using your hand.

    • If it is too tight you may use a torx-head screwdriver or a flat-head screwdriver.

  2. HP Envy 700-030qe RAM Replacement: adım 2, 2 resimden 1. HP Envy 700-030qe RAM Replacement: adım 2, 2 resimden 2.
    • You can now slide off the side panel of the desktop.

    • You should now have an opening on the side of your computer as shown in the second picture.

    • The location of the RAM is highlighted in red.

  3. HP Envy 700-030qe RAM Replacement: adım 3, 2 resimden 1. HP Envy 700-030qe RAM Replacement: adım 3, 2 resimden 2.
    • Undo the clips on each end of the chip as shown in the second picture.

    • Then you may carefully remove the RAM chips by pulling them out by their the ends.

    • Make sure you pull the chips out by the ends and not grabbing the entire thing. This may damage the chips.

    • Remember the slots that you take the RAM chips from. You must put the two replacement chips in the same slots.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Sam Wheeler

Üyelik tarihi: 10/01/15

225 İtibar

1 Kılavuz yazıldı

Ekip

Cal Poly, Team 5-9, Maness Fall 2015 Cal Poly, Team 5-9, Maness Fall 2015 üyesi

CPSU-MANESS-F15S5G9

4 Üyeler

10 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 5

Son 30 gün: 23

Her zaman: 706