Ana içeriğe geç

Giriş

A guide on how to properly remove and replace the fan in the HP Envy TouchSmart 4-1215dx.

Parçalar

Hiçbir parça belirtilmedi.

  1. Remove the thirteen Phillips #0 screws. Remove the thirteen Phillips #0 screws.
    • Remove the thirteen Phillips #0 screws.

  2. Pull the panel up and off to remove from the laptop. Pull the panel up and off to remove from the laptop.
    • Pull the panel up and off to remove from the laptop.

  3. MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now

    MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now
  4. Unplug the fan from the motherboard.
    • Unplug the fan from the motherboard.

  5. Remove the four Phillips #0 screws holding in the fan. Pull out the fan.
    • Remove the four Phillips #0 screws holding in the fan.

    • Pull out the fan.

Sonuç

To reassemble your device, follow these instructions in reverse order.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 63