Eşyalarını Tamir Et Topluluk Mağaza

HP G60T-600 CTO Power Button Frame Replacement

Giriş

The guide will show you step by step how to replace the power button for this device.

Neye ihtiyacın var

  1. HP G60T-600 CTO Power Button Frame Replacement, Battery: adım 1, 1 resimden 1.

    • Failure to remove the battery before performing any replacement guide may result in electric shock.

    • Close your device, then turn it over.

    Düzenle

  2. HP G60T-600 CTO Power Button Frame Replacement: adım 2, 2 resimden 1. HP G60T-600 CTO Power Button Frame Replacement: adım 2, 2 resimden 2.

    • Place your index finger on the ridged tab.

    Düzenle

  3. HP G60T-600 CTO Power Button Frame Replacement: adım 3, 1 resimden 1.

    • Apply moderate pressure to the tab and slide it to the right.

    • While the tab is on the right, you should be able to gently slide your battery out of your device.

    Düzenle

  4. HP G60T-600 CTO Power Button Frame Replacement, Keyboard: adım 4, 2 resimden 1. HP G60T-600 CTO Power Button Frame Replacement, Keyboard: adım 4, 2 resimden 2.

    • Unscrew the following 5mm screws with a #0 Phillips screwdriver.

    Düzenle

  6. HP G60T-600 CTO Power Button Frame Replacement: adım 5, 1 resimden 1.

    • Turn your laptop over and open it up.

    • Grip your laptop firmly from both sides and use your thumbs to slide the keyboard towards the screen.

    Düzenle

  7. HP G60T-600 CTO Power Button Frame Replacement: adım 6, 1 resimden 1.

    • Pull up on the top of your keyboard with medium force. It should start to pop out.

    • A plastic opening tool may facilitate this task.

    • Run your hands underneath the edges of the keyboard until it is free from the device.

    • Do not pull hard to take the keyboard out. There is a small connection that needs to be undone.

    Düzenle

  8. HP G60T-600 CTO Power Button Frame Replacement: adım 7, 2 resimden 1. HP G60T-600 CTO Power Button Frame Replacement: adım 7, 2 resimden 2.

    • Place your thumbs on the two small, white tabs.

    • Push these tabs forward to release the connection and free the keyboard from the device.

    Düzenle

  9. HP G60T-600 CTO Power Button Frame Replacement, Power Button Frame: adım 8, 1 resimden 1.

    • Similarly to how you remove the keyboard, gently pry a small section of the power button frame up.

    Düzenle

  10. HP G60T-600 CTO Power Button Frame Replacement: adım 9, 2 resimden 1. HP G60T-600 CTO Power Button Frame Replacement: adım 9, 2 resimden 2.

    • Gently pull the white tab upwards.

    • With similar force, pull the connection out.

    • You are now free to pull the power button frame off of your device.

    Düzenle

  11. HP G60T-600 CTO Power Button Frame Replacement: adım 10, 1 resimden 1.

    • Unscrew the 5mm screw holding the CD player in place.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

2 tane daha katılımcı ile

Dominic DeSantis

Üyelik tarihi: 10/19/16

748 İtibar

6 adet Kılavuz yazıldı

Rozetler: 13

+10 tane daha rozet

Ekip

UMass Dartmouth, Team 4-5, Catania Fall 2016 UMass Dartmouth, Team 4-5, Catania Fall 2016 üyesi

UMASSD-CATANIA-F16S4G5

3 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 2

Her zaman: 145