Parçalar

Hiçbir parçaya gerek yok.

Flip the device over so that the bottom side is facing up and use the Phillips #1 Screw Driver to remove the four 4mm screws on the cover panel. Lift the panel to remove it from the device.
  • Flip the device over so that the bottom side is facing up and use the Phillips #1 Screw Driver to remove the four 4mm screws on the cover panel.

  • Lift the panel to remove it from the device.

Yorum Ekle

Remove the RAM by placing your thumbs on the silver tabs on each side of the RAM stick and pulling the tabs away from the RAM stick. The RAM stick should "flip" up when it is released from its holders. Pull the RAM stick toward you to remove it.
  • Remove the RAM by placing your thumbs on the silver tabs on each side of the RAM stick and pulling the tabs away from the RAM stick.

    • The RAM stick should "flip" up when it is released from its holders.

  • Pull the RAM stick toward you to remove it.

  • Repeat the above step to remove the second RAM stick

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

2 başka kişi bu kılavuzu tamamladı.

Marshall Reid

Üyelik tarihi: 14-04-2014

473 İtibar

3 adet Kılavuz yazıldı

Takım

Cal Poly, Team 12-38, Maness Spring 2014 Cal Poly, Team 12-38, Maness Spring 2014 üyesi

CPSU-MANESS-S14S12G38

4 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 2

Son 30 Gün: 5

Her zaman: 360