Ana içeriğe geç

Bu kılavuzda güncel değişiklikler var. En son onaylanmamış sürüme geçin.

HP Mini 1000 Hard Drive Replacement

Salt Önkoşul
Bu kılavuz yalnızca diğer kılavuzlar için bir ön koşul olarak kullanılmak üzere tasarlanmıştır. Tek başına eksiktir.

Neye ihtiyacın var

  1. HP Mini 1000 Hard Drive Replacement, Hard Drive: adım 1, 2 resimden 1. HP Mini 1000 Hard Drive Replacement, Hard Drive: adım 1, 2 resimden 2.
    • Use your fingernail or the flat end of a spudger to flip up the retaining flap on the SIM card ribbon cable ZIF socket.

    • Be sure you are prying up on the retaining flap, not the socket itself.

    • Pull the SIM card ribbon cable out of its socket and peel it off the top of the hard drive enclosure.

  2. HP Mini 1000 Hard Drive Replacement: adım 2, 1 resimden 1.
    • Use your fingernail or the flat end of a spudger to flip up the retaining flap on the hard drive cable ZIF socket.

    • Be sure you are prying up on the retaining flap, not the socket itself.

  3. HP Mini 1000 Hard Drive Replacement: adım 3, 1 resimden 1.
    • Remove the two 4.5 mm Phillips screws securing the hard drive to the lower case.

  4. HP Mini 1000 Hard Drive Replacement: adım 4, 2 resimden 1. HP Mini 1000 Hard Drive Replacement: adım 4, 2 resimden 2.
    • Lift the hard drive up and out of the lower case, being careful not to damage its cable in the process.

Sonuç

To reassemble your device, follow these instructions in reverse order.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 76