Eşyalarını Tamir Et Topluluk Mağaza

HP Officejet Pro 6835 Speaker Replacement

Giriş

After consistent use the printer speaker can stop working. This guide will go over how to change out the speaker at the front of the printer.

Neye ihtiyacın var

  1. HP Officejet Pro 6835 Speaker Replacement, HP Officejet Pro 6835 Cover Disassembly: adım 1, 1 resimden 1.

    • Open the main lid as far as it will go.

    • Use a plastic opening tool to gently pry off the hinge on the right side by pushing it to the left and off the hook.

    • Open the lid further.

    Düzenle

  2. HP Officejet Pro 6835 Speaker Replacement: adım 2, 3 resimden 1. HP Officejet Pro 6835 Speaker Replacement: adım 2, 3 resimden 2. HP Officejet Pro 6835 Speaker Replacement: adım 2, 3 resimden 3.

    • Use a T9 torx screwdriver to remove a total of ten (10) 12mm screws from the main cover by turning the screwdriver counterclockwise.

    • The two screws above the screen assembly are deep so you may need a long screwdriver.

    Düzenle

  4. HP Officejet Pro 6835 Speaker Replacement: adım 3, 1 resimden 1.

    • Grab the main cover and lift it up slightly.

    • Do not pull too hard—there is a cable connecting the cover to the printer.

    Düzenle

  5. HP Officejet Pro 6835 Speaker Replacement: adım 4, 2 resimden 1. HP Officejet Pro 6835 Speaker Replacement: adım 4, 2 resimden 2.

    • Grab the base of the white ribbon cable connecting the cover to the base of the printer and pull it out.

    Düzenle

  6. HP Officejet Pro 6835 Speaker Replacement, Speaker: adım 5, 3 resimden 1. HP Officejet Pro 6835 Speaker Replacement, Speaker: adım 5, 3 resimden 2. HP Officejet Pro 6835 Speaker Replacement, Speaker: adım 5, 3 resimden 3.

    • Grab the intertwined red and black wires. Gently pull up and disconnect the wires from the motherboard.

    • Be careful to remove the wires from the socket, NOT the socket from the board.

    Düzenle

  7. HP Officejet Pro 6835 Speaker Replacement: adım 6, 1 resimden 1.

    • Carefully slide the speaker out of the printer.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

2 tane daha katılımcı ile

David J

Üyelik tarihi: 01/24/18

169 İtibar

2 adet Kılavuz yazıldı

Rozetler: 2

Ekip

Cal Poly, Team S2-G4, Livingston Winter 2018 Cal Poly, Team S2-G4, Livingston Winter 2018 üyesi

CPSU-LIVINGSTON-W18S2G4

4 Üyeler

16 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 4

Son 30 gün: 6

Her zaman: 267