Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

HP Pavilion 14-b015dx Keyboard Replacement

Yazan: Gregory Bridge (ve 3 başka katılımcı)
  • Yorumlar: 0
  • Favoriler: 0
  • Tamamlanma: 1

Zorluk

Kolay

Adımlar

7

Gerekli Süre

10 dakika

Bölümler

2

İşaretler

1

Action Shots

İşlem Görüntüleri

Öykünün yıldızı olun! Belirli eylemlerin nasıl gerçekleştirileceğini daha iyi göstermek için bu kılavuza resimler gerekli.

Giriş

This guide can be used to replace the keyboard in your HP Pavilion 14-b015dx Laptop.

Aletler

Bu aletleri satın al

Parçalar

Hiçbir parça belirtilmedi.

  1. Make sure the computer is completely powered down and unplug the power cord.

    • Make sure the computer is completely powered down and unplug the power cord.

    Düzenle

  2. Place the device on your work surface with bottom facing up and the battery located at the top.

    • Place the device on your work surface with bottom facing up and the battery located at the top.

    Düzenle

  3. Slide the left release tab toward the center of the computer to the unlock position. Next slid the right tab toward the center of the computer and hold it there while completing step 4.

    • Slide the left release tab toward the center of the computer to the unlock position. Next slid the right tab toward the center of the computer and hold it there while completing step 4.

    Düzenle

  4. The Essential Toolkit

    The most helpful tools in our most compact kit.

    Hemen Alışveriş Yapın

    The Essential Toolkit

    The most helpful tools in our most compact kit.

    Hemen Alışveriş Yapın

  5. Remove the battery by sliding it upwards and away from the computer.

    • Remove the battery by sliding it upwards and away from the computer.

    Düzenle

  6. Unscrew the ten 6.0 mm Philips head screws on the base of the device with a Phillips #0 head screwdriver.

    • Unscrew the ten 6.0 mm Philips head screws on the base of the device with a Phillips #0 head screwdriver.

    Düzenle

  7. Insert the plastic opening tool between the keyboard and the plastic housing.

    • Insert the plastic opening tool between the keyboard and the plastic housing.

    • Pry the keyboard upward away from the device.

    • Move the tool around the edge of the entire keyboard while continuing to pry.

    • You will hear the clips pop once you have released them.

    Düzenle

  8. Once you have released all of the clips, slowly lift the keyboard exposing the ribbon cable.

    • Once you have released all of the clips, slowly lift the keyboard exposing the ribbon cable.

    • Lift the tab on the keyboard ZIF connector with a plastic opening tool and gently remove the ribbon cable.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Yazar

3 tane daha katılımcı ile

Gregory Bridge

Üyelik tarihi: 24-10-2017

623 İtibar

6 adet Kılavuz yazıldı

Rozetler: 8

+5 tane daha rozet

Takım

UMass Dartmouth, Team S1-G1, Isaacson Fall 2017 UMass Dartmouth, Team S1-G1, Isaacson Fall 2017 üyesi

UMASSD-ISAACSON-F17S1G1

3 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 3

Son 30 gün: 12

Her zaman: 1,070