Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

Giriş

In this guide, you will learn how to remove the hard drive in the HP Pavilion 15-ab165us laptop.

  1. Flip the computer over so that the bottom cover is facing you. Slide the two locks to the "unlock" position and remove the battery.
    • Flip the computer over so that the bottom cover is facing you.

    • Slide the two locks to the "unlock" position and remove the battery.

  2. Remove the two 8mm screws underneath with a Phillips #1 screwdriver. Use a plastic opening tool to remove the plastic feet. Use a plastic opening tool to remove the plastic feet.
    • Remove the two 8mm screws underneath with a Phillips #1 screwdriver.

    • Use a plastic opening tool to remove the plastic feet.

  3. Remove the two plastic tabs  with a metal spudger. Remove the two plastic tabs  with a metal spudger. Remove the two plastic tabs  with a metal spudger.
    • Remove the two plastic tabs with a metal spudger.

  4. Remove the sixteen 8mm screws  that hold the bottom cover with a Phillips #1 screwdriver.
    • Remove the sixteen 8mm screws that hold the bottom cover with a Phillips #1 screwdriver.

  5. Pull the Optical Drive out.
    • Pull the Optical Drive out.

  6. Remove the 3mm screws that were hidden under the Optical Drive with a Phillips #0 screwdriver.
    • Remove the 3mm screws that were hidden under the Optical Drive with a Phillips #0 screwdriver.

  7. Flip the computer back over. Use a plastic opening tool to release the clips holding the keyboard section in place.
    • Flip the computer back over.

    • Use a plastic opening tool to release the clips holding the keyboard section in place.

  8. Close the lid and pull the screen and keyboard section up and away from the disconnected bottom cover.
    • Close the lid and pull the screen and keyboard section up and away from the disconnected bottom cover.

    • The hard drive is NOT screwed into place on the underside of the keyboard section.

  9. Locate the ribbon cable connecting the hard drive to the motherboard.
    • Locate the ribbon cable connecting the hard drive to the motherboard.

  10. On the motherboard, lift the white tab up to release the ribbon cable.
    • On the motherboard, lift the white tab up to release the ribbon cable.

  11. Pull the blue tab up and out from the motherboard to disconnect the ribbon cable.
    • Pull the blue tab up and out from the motherboard to disconnect the ribbon cable.

  12. Pull the hard drive out of the enclosure.
    • Pull the hard drive out of the enclosure.

Sonuç

To reassemble your device, follow these instructions in reverse order.

4 farklı kişi bu kılavuzu tamamladı.

Preston Palmer

Üyelik tarihi: 01-11-2017

215 İtibar

1 Kılavuz yazıldı

Takım

UW Tacoma, Team S1-G2, Rose Fall 2017 UW Tacoma, Team S1-G2, Rose Fall 2017 üyesi

UWT-ROSE-F17S1G2

5 Üyeler

14 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 3

Son 7 gün: 4

Son 30 gün: 17

Her zaman: 1,208