HP Pavilion TouchSmart 14z-n100 Keyboard Replacement

Yazan: Antonio DiMattia (ve bir diğer katılımcı)

Yorumlar: 0
Favoriler: 0
Tamamlanma: 1

HP Pavilion TouchSmart 14z-n100 Keyboard Replacement

Zorluk

Orta

Adımlar

Gerekli Süre

10 dakika

Giriş

Follow this guide to replace the keyboard on a HP Pavilion TouchSmart 14z-n100. You will need a number 1 Phillips screwdriver, a plastic spudger and a replacement keyboard.

Aletler

Bu aletleri satın al

Phillips #1 Screwdriver

$5.49

Satın Al
iFixit Opening Tools

$4.99

Satın Al

Parçalar

Hiçbir parça belirtilmedi.

Adım 1 Keyboard

Remove these two, 4 mm long number 1 Phillips screws from the device.

Remove these two, 4 mm long number 1 Phillips screws from the device.

Düzenle

Adım 2

Gently pull the keyboard up with a small plastic opening tool, beginning toward the front right corner. Just pull the keyboard up enough to fit your fingers under.

Gently pull the keyboard up with a small plastic opening tool, beginning toward the front right corner. Just pull the keyboard up enough to fit your fingers under.

Düzenle

Adım 3

Gently pull the keyboard up with your fingers. Do not pull the keyboard too far from the computer.

Gently pull the keyboard up with your fingers. Do not pull the keyboard too far from the computer.

Düzenle

Adım 4

Lift the plastic retaining tab with a small plastic opening tool. The tab will rotate to the side but not remove from the laptop. After this gently pull the wire ribbon to remove it. The old keyboard is now completely removed.

Lift the plastic retaining tab with a small plastic opening tool. The tab will rotate to the side but not remove from the laptop. After this gently pull the wire ribbon to remove it. The old keyboard is now completely removed.

Düzenle