Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

Giriş

If you need to install new ram in your HP Pavilion Touch Smart, follow this guide. Required tools for the replacement of RAM are a phillips #1 screwdriver and iFixit opening tools.

  1. Remove the two #1 Phillips 4mm screws that hold the cover in place. Remove the two #1 Phillips 4mm screws that hold the cover in place.
    • Remove the two #1 Phillips 4mm screws that hold the cover in place.

  2. Use the plastic opening tool to remove the cover. There are several clips that hold it on. Carefully slide the plastic opening tool under the edge of the cover until it comes loose. You can now remove the cover.
    • Use the plastic opening tool to remove the cover. There are several clips that hold it on.

    • Carefully slide the plastic opening tool under the edge of the cover until it comes loose.

    • You can now remove the cover.

  3. There are 4 clips total, one on each side of the RAM. Remove the ram by pushing the clamps outward, away from the ram After the pushing the clamps outward the ram should lift up and be able to slide out.
    • There are 4 clips total, one on each side of the RAM.

    • Remove the ram by pushing the clamps outward, away from the ram

    • After the pushing the clamps outward the ram should lift up and be able to slide out.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Daniel Zwissler

Üyelik tarihi: 28-08-2018

97 İtibar

1 Kılavuz yazıldı

Takım

IUPUI, Team S1-G4, Arle Fall 2018 IUPUI, Team S1-G4, Arle Fall 2018 üyesi

IUPUI-ARLE-F18S1G4

3 Üyeler

3 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 58