Giriş

If your hard drive is not working or you want to add in a larger hard drive, follow this guide.

Remove the two screws from the hard drive shield and lift it off starting at the right side.  The screws will remain in the shield.
  • Remove the two screws from the hard drive shield and lift it off starting at the right side. The screws will remain in the shield.

Yorum Ekle

Pull the plastic tab attached to the hard drive. The hard drive lifts right out.  Pull gently so you don't damage the contacts.
  • Pull the plastic tab attached to the hard drive. The hard drive lifts right out. Pull gently so you don't damage the contacts.

Yorum Ekle

  • Now you have your hard drive out!

Yorum Ekle

  • Gently pull forward the HP adapter from the top of the hard drive.

  • Insert the adapter onto the new SATA hard drive, to be replaced in the laptop.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

14 başka kişi bu kılavuzu tamamladı.

Ben Hirsch

Üyelik tarihi: 05-10-2010

3.607 İtibar

10 adet Kılavuz yazıldı

Takım

Cal Poly, Team 21-33, Regan Fall 2010 Cal Poly, Team 21-33, Regan Fall 2010 üyesi

CPSU-REGAN-F10S21G33

4 Üyeler

10 adet Kılavuz yazıldı

2 Yorum

thanks for your help

moyguens - Yanıt

I was scratching my head when I recvd the new hd w/out the adapter... LOL! thanks

gilaraujog - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 Gün: 21

Son 30 Gün: 158

Her zaman: 34,039