Eşyalarını Tamir Et Topluluk Mağaza

HP Pavilion x2 10-n113dx Hinge Replacement

Giriş

The hinge of the HP Pavilion X2 may need replacement if it is damaged, or the screen is unable to open properly. This guide shows how to disassemble the HP Pavilion X2 to allow for removal and replacement of the hinge, which connects the screen with the keyboard.

Neye ihtiyacın var

  1. HP Pavilion x2 10-n113dx Hinge Replacement, Hinge: adım 1, 2 resimden 1. HP Pavilion x2 10-n113dx Hinge Replacement, Hinge: adım 1, 2 resimden 2.

    • Separate the screen from the keyboard.

    Düzenle

  2. HP Pavilion x2 10-n113dx Hinge Replacement: adım 2, 2 resimden 1. HP Pavilion x2 10-n113dx Hinge Replacement: adım 2, 2 resimden 2.

    • Remove the grey rubber bar using plastic spudger or tweezers, exposing the four screw heads.

    • The rubber bar is attached with an adhesive. A heat pad may be required to melt the adhesive and allow for easier removal.

    Düzenle

  3. HP Pavilion x2 10-n113dx Hinge Replacement: adım 3, 1 resimden 1.

    • Unscrew the four screws using the Phillips #0 screwdriver.

    • All four of these screws have a diameter of 4.3 mm and a height of 3.7 mm.

    Düzenle

  4. HP Pavilion x2 10-n113dx Hinge Replacement: adım 4, 2 resimden 1. HP Pavilion x2 10-n113dx Hinge Replacement: adım 4, 2 resimden 2.

    • Remove the circular rubber tabs exposing the screw heads below.

    • A heat pad may be required to melt the tab adhesive and allow for easier removal.

    • Unscrew the two screws using the Phillips #0 screwdriver.

    • These two screws are 5.3 mm in diameter and 4.3 mm in height.

    Düzenle

  6. HP Pavilion x2 10-n113dx Hinge Replacement: adım 5, 3 resimden 1. HP Pavilion x2 10-n113dx Hinge Replacement: adım 5, 3 resimden 2. HP Pavilion x2 10-n113dx Hinge Replacement: adım 5, 3 resimden 3.

    • Once all screws have been removed, gently pry open the back casing using a metal spudger.

    • Be sure to use the spudger at the marked locations to avoid damage to the casing.

    Düzenle

  7. HP Pavilion x2 10-n113dx Hinge Replacement: adım 6, 2 resimden 1. HP Pavilion x2 10-n113dx Hinge Replacement: adım 6, 2 resimden 2.

    • Completely remove the back casing.

    Düzenle

  8. HP Pavilion x2 10-n113dx Hinge Replacement: adım 7, 1 resimden 1.

    • Unscrew the four screws located at the marked locations using the Phillips #0 screwdriver.

    • All fours of these screws have a 7.0 mm diameter an a 2.5 mm height.

    Düzenle

  9. HP Pavilion x2 10-n113dx Hinge Replacement: adım 8, 1 resimden 1.

    • Remove adhesive that secures the ribbon cable using tweezers.

    Düzenle

  10. HP Pavilion x2 10-n113dx Hinge Replacement: adım 9, 3 resimden 1. HP Pavilion x2 10-n113dx Hinge Replacement: adım 9, 3 resimden 2. HP Pavilion x2 10-n113dx Hinge Replacement: adım 9, 3 resimden 3.

    • Using a plastic spudger, flip open the switch for the connection port, allowing the ribbon cable to be removed.

    Düzenle

  11. HP Pavilion x2 10-n113dx Hinge Replacement: adım 10, 3 resimden 1. HP Pavilion x2 10-n113dx Hinge Replacement: adım 10, 3 resimden 2. HP Pavilion x2 10-n113dx Hinge Replacement: adım 10, 3 resimden 3.

    • Gently lift the hinge from the attachment points as shown in the picture.

    • Tweezers can be also be used to ensure the ribbon cable does not get damaged in the process.

    • The hinge can now be completely separated.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

2 tane daha katılımcı ile

Ajay Panuganti

Üyelik tarihi: 04/01/19

181 İtibar

1 Kılavuz yazıldı

Rozetler: 2

Ekip

IUPUI, Team S1-G4, Harley Spring 2019 IUPUI, Team S1-G4, Harley Spring 2019 üyesi

IUPUI-HARLEY-S19S1G4

3 Üyeler

3 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 9

Her zaman: 1,111