Eşyalarını Tamir Et Topluluk Mağaza

HP Pavilion x2 10-n113dx Touch Pad Replacement

Giriş

This guide will show how to replace a touch pad in the HP Pavilion x2 10-n113dx. This guide is moderate in difficulty as one must open up the back of the keyboard. It is important to have a heat pad available so that one can reassemble the gray bumper on the back of the keyboard. The replacement guide requires a Phillips #0 screwdriver and a magnetic board is helpful for keeping track of screws.

Neye ihtiyacın var

  1. HP Pavilion x2 10-n113dx Touch Pad Replacement, Touch Pad: adım 1, 2 resimden 1. HP Pavilion x2 10-n113dx Touch Pad Replacement, Touch Pad: adım 1, 2 resimden 2.

    • Separate the screen from the keyboard.

    Düzenle

  2. HP Pavilion x2 10-n113dx Touch Pad Replacement: adım 2, 1 resimden 1.

    • Loosen the adhesive under the gray plastic bar using a heat pad or a heat gun.

    • Remove the gray plastic bar after 5 minutes of light heat with tweezers by pulling up.

    Düzenle

  3. HP Pavilion x2 10-n113dx Touch Pad Replacement: adım 3, 1 resimden 1.

    • Remove the 4 screws with a Phillips #0 screwdriver.

    • These 4 screws have a diameter of 4.3 mm and a height of 3.7 mm.

    Düzenle

  5. HP Pavilion x2 10-n113dx Touch Pad Replacement: adım 4, 2 resimden 1. HP Pavilion x2 10-n113dx Touch Pad Replacement: adım 4, 2 resimden 2.

    • Remove the rubber stoppers at the top left and right with tweezers.

    • Remove the screws at the top and right with at Phillips #0 screwdriver.

    • These two screws have a diameter of 5.3 mm and a height of 4.3 mm.

    Düzenle

  6. HP Pavilion x2 10-n113dx Touch Pad Replacement: adım 5, 3 resimden 1. HP Pavilion x2 10-n113dx Touch Pad Replacement: adım 5, 3 resimden 2. HP Pavilion x2 10-n113dx Touch Pad Replacement: adım 5, 3 resimden 3.

    • Pry open the back case with a metal spudger.

    • Then pry open the back layer with the metal spudger.

    Düzenle

  7. HP Pavilion x2 10-n113dx Touch Pad Replacement: adım 6, 2 resimden 1. HP Pavilion x2 10-n113dx Touch Pad Replacement: adım 6, 2 resimden 2.

    • Fully take off the back panel by lifting up the panel.

    Düzenle

  8. HP Pavilion x2 10-n113dx Touch Pad Replacement: adım 7, 2 resimden 1. HP Pavilion x2 10-n113dx Touch Pad Replacement: adım 7, 2 resimden 2.

    • Pop open the ribbon cable piece on the touch pad with the blue plastic spudger.

    • Remove the ribbon cable with tweezers by pulling it out.

    Düzenle

  9. HP Pavilion x2 10-n113dx Touch Pad Replacement: adım 8, 2 resimden 1. HP Pavilion x2 10-n113dx Touch Pad Replacement: adım 8, 2 resimden 2.

    • Remove 4 screws with at Phillips #0 screwdriver. All 4 screws have a diameter of 4.3 mm and a height of 3.7 mm.

    • Lift the tape shown with orange boxes with tweezers.

    • Remove metal bar with a blue spudger.

    Düzenle

  10. HP Pavilion x2 10-n113dx Touch Pad Replacement: adım 9, 3 resimden 1. HP Pavilion x2 10-n113dx Touch Pad Replacement: adım 9, 3 resimden 2. HP Pavilion x2 10-n113dx Touch Pad Replacement: adım 9, 3 resimden 3.

    • Lift up the touch pad by the metal edge with a blue plastic spudger.

    • Remove the touch pad from the computer.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

1 tane daha katılımcı ile

Cayla Skaggs

Üyelik tarihi: 04/01/19

337 İtibar

2 adet Kılavuz yazıldı

Rozetler: 3

Ekip

IUPUI, Team S1-G4, Harley Spring 2019 IUPUI, Team S1-G4, Harley Spring 2019 üyesi

IUPUI-HARLEY-S19S1G4

3 Üyeler

3 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 2

Son 30 gün: 3

Her zaman: 700