Ana içeriğe geç

Giriş

Don't know how to remove your HP's keyboard? This guide shows you the steps to successfully remove your HP's keyboard to allow you to replace it.

Parçalar

Hiçbir parça belirtilmedi.

  1. Unscrew all screws on the back of the laptop.
    • Unscrew all screws on the back of the laptop.

    • There should be a total of 22 screws.

  2. Remove all the protective covers such as the RAM protective cover. Then remove the battery by pushing up on the battery release switch and pull the battery out.
    • Remove all the protective covers such as the RAM protective cover.

    • Then remove the battery by pushing up on the battery release switch and pull the battery out.

  3. Skip the upgrade.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now

    Skip the upgrade.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now
  4. Wedge open the top panel located above the keyboard.
    • Wedge open the top panel located above the keyboard.

    • This piece will not come off.

    • 5 screws should be visible under the lifted panel. Unscrew all screws attaching the keyboard to the laptop.

  5. Once all the screws are taken out of the top portion of the keyboard, wedge open the keyboard on all sides of the keyboard.
    • Once all the screws are taken out of the top portion of the keyboard, wedge open the keyboard on all sides of the keyboard.

  6. Lift the keyboard and unplug it out of the socket.
    • Lift the keyboard and unplug it out of the socket.

  7. You have successfully removed the keyboard.
    • You have successfully removed the keyboard.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Sonny Sem

Üyelik tarihi: 11-10-2016

356 İtibar

3 adet Kılavuz yazıldı

Takım

Texas Tech, Team 38-5, Bennett Fall 2016 Texas Tech, Team 38-5, Bennett Fall 2016 üyesi

TTU-BENNETT-F16S38G5

4 Üyeler

3 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 86