Eşyalarını Tamir Et Topluluk Mağaza

HP ProOne 600 G1 Solid State Drive Replacement

Giriş

The maximum dimensions of a new solid state drive are 100.5 x 69.85 x 7.0mm. Before performing any work, always remember to completely turn off and disconnect your computer from any power source.

Neye ihtiyacın var

  1. HP ProOne 600 G1 Solid State Drive Replacement, Solid State Drive: adım 1, 2 resimden 1. HP ProOne 600 G1 Solid State Drive Replacement, Solid State Drive: adım 1, 2 resimden 2.

    • Push the unlock tabs on the back of the monitor in and towards each other while sliding the back cover up.

    Düzenle

  2. HP ProOne 600 G1 Solid State Drive Replacement: adım 2, 1 resimden 1.

    • Pull up on the hard drive bay handle and push it to the left while holding back the metal tab on the bottom.

    Düzenle

  4. HP ProOne 600 G1 Solid State Drive Replacement: adım 3, 1 resimden 1.

    • Pull side latch out and slide the hard drive tray out of the bay.

    Düzenle

  5. HP ProOne 600 G1 Solid State Drive Replacement: adım 4, 2 resimden 1. HP ProOne 600 G1 Solid State Drive Replacement: adım 4, 2 resimden 2.

    • Remove the four 5/16" side screws, with the T15 Torx Screwdriver, and gently take out the drive.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Ekli Belgeler

Yazar

6 tane daha katılımcı ile

Janelle Layman

Üyelik tarihi: 10/01/15

258 İtibar

2 adet Kılavuz yazıldı

Rozetler: 9

+6 tane daha rozet

Ekip

Cal Poly, Team 1-20, Maness Fall 2015 Cal Poly, Team 1-20, Maness Fall 2015 üyesi

CPSU-MANESS-F15S1G20

4 Üyeler

12 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 8

Son 7 gün: 31

Son 30 gün: 109

Her zaman: 7,091