Ana içeriğe geç

HP ProOne 600 G1 Wi-Fi Adapter Replacement

Neye ihtiyacın var

  1. HP ProOne 600 G1 Wi-Fi Adapter Replacement, Back Removal: adım 1, 2 resimden 1. HP ProOne 600 G1 Wi-Fi Adapter Replacement, Back Removal: adım 1, 2 resimden 2.
    • Push the unlock tabs on the back of the monitor in and towards each other while sliding the back cover up.

  2. HP ProOne 600 G1 Wi-Fi Adapter Replacement: adım 2, 2 resimden 1. HP ProOne 600 G1 Wi-Fi Adapter Replacement: adım 2, 2 resimden 2.
    • Loosen the two 1/2" screws , with the T15 Torx Screwdriver, on each side of the stand. Remove stand.

  3. HP ProOne 600 G1 Wi-Fi Adapter Replacement: adım 3, 1 resimden 1.
    • Take out the single 3/8" screw, with the T15 Torx Screwdriver, from the middle of the backplate.

  4. HP ProOne 600 G1 Wi-Fi Adapter Replacement: adım 4, 1 resimden 1.
    • Remove the backplate by pulling it back towards you.

    • Small plastic tabs hold in the backplate, pull these up to remove it.

  5. HP ProOne 600 G1 Wi-Fi Adapter Replacement, Wi-Fi Adapter: adım 5, 2 resimden 1. HP ProOne 600 G1 Wi-Fi Adapter Replacement, Wi-Fi Adapter: adım 5, 2 resimden 2.
    • Locate the Wi-Fi adapter at the top right corner of where the stand once was.

    • Unscrew the screws using the Philips #1 Screwdriver.

  6. HP ProOne 600 G1 Wi-Fi Adapter Replacement: adım 6, 1 resimden 1.
    • Remove wire tabs from the left side of the Wi-Fi adapter.

    • Remove the adapter

Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Janelle Layman

Üyelik tarihi: 10/01/15

258 İtibar

2 adet Kılavuz yazıldı

Ekip

Cal Poly, Team 1-20, Maness Fall 2015 Cal Poly, Team 1-20, Maness Fall 2015 üyesi

CPSU-MANESS-F15S1G20

4 Üyeler

12 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 3

Son 7 gün: 13

Son 30 gün: 51

Her zaman: 3,896