Ana içeriğe geç

HP Split x2 Trackpad Replacement

Neye ihtiyacın var

  1. HP Split x2 Trackpad Replacement, Trackpad: adım 1, 3 resimden 1. HP Split x2 Trackpad Replacement, Trackpad: adım 1, 3 resimden 2. HP Split x2 Trackpad Replacement, Trackpad: adım 1, 3 resimden 3.
    • Remove the bumpers at the back of the keyboard part.

    • Use a J1 screwdriver head to remove the 7mm screws underneath the bumpers.

  2. HP Split x2 Trackpad Replacement: adım 2, 2 resimden 1. HP Split x2 Trackpad Replacement: adım 2, 2 resimden 2.
    • Use a J1 screwdriver head to remove the remaining 5mm screws at the back of the keyboard part.

  3. HP Split x2 Trackpad Replacement: adım 3, 1 resimden 1.
    • Use the opening tool to carefully remove the back cover of the keyboard.

  4. HP Split x2 Trackpad Replacement: adım 4, 1 resimden 1.
    • Use a J1 screwdriver head to remove the black 2mm screws along the top part of the trackpad

    • Using the same screwdriver head, remove the black 3mm screws along the bottom part of the trackpad

  5. HP Split x2 Trackpad Replacement: adım 5, 1 resimden 1.
    • Disconnect the ribbon cable and move it out of the way.

  6. HP Split x2 Trackpad Replacement: adım 6, 1 resimden 1.
    • Slide the trackpad out from underneath the ribbon cables.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Jose Francisco

Üyelik tarihi: 03/04/17

137 İtibar

1 Kılavuz yazıldı

Ekip

IUPUI, Team S6-G6, Wilson Spring 2017 IUPUI, Team S6-G6, Wilson Spring 2017 üyesi

IUPUI-WILSON-S17S6G6

4 Üyeler

2 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 2

Son 30 gün: 6

Her zaman: 1,583