Eşyalarını Tamir Et Topluluk Mağaza

HP iPAQ H2200 faceplate replacement

Giriş

The purpose of this guide is to instruct the reader on how to replace the faceplates of their HP iPAQ H2200 device.

Neye ihtiyacın var

  1. HP iPAQ H2200 faceplate replacement, Battery: adım 1, 1 resimden 1.

    • Press and slide the battery cover tab to remove battery cover.

    Düzenle

  2. HP iPAQ H2200 faceplate replacement: adım 2, 2 resimden 1. HP iPAQ H2200 faceplate replacement: adım 2, 2 resimden 2.

    • Pull on the black tab to lift the battery out of the battery compartment.

    Düzenle

  3. HP iPAQ H2200 faceplate replacement, Main Board: adım 3, 1 resimden 1.

    • Remove the stylus by sliding it out of the slot.

    Düzenle

  4. HP iPAQ H2200 faceplate replacement: adım 4, 1 resimden 1.

    • Remove the CF card by sliding it out of the slot at the top of the device.

    Düzenle

  5. HP iPAQ H2200 faceplate replacement: adım 5, 1 resimden 1.

    • Press down and push the black side strips toward the top of the device to remove them.

    Düzenle

  7. HP iPAQ H2200 faceplate replacement: adım 6, 3 resimden 1. HP iPAQ H2200 faceplate replacement: adım 6, 3 resimden 2. HP iPAQ H2200 faceplate replacement: adım 6, 3 resimden 3.

    • Using the T5 Torx screwdriver, remove all six screws on the back and all screws on each side of the device.

    Düzenle

  8. HP iPAQ H2200 faceplate replacement: adım 7, 2 resimden 1. HP iPAQ H2200 faceplate replacement: adım 7, 2 resimden 2.

    • Remove the back faceplate by pushing and loosening the 4 side slots (2 on each side).

    Düzenle

  9. HP iPAQ H2200 faceplate replacement: adım 8, 1 resimden 1.

    • Open the LCD connector, where the orange strip attaches to the main board.

    Düzenle

  10. HP iPAQ H2200 faceplate replacement: adım 9, 1 resimden 1.

    • Carefully remove the orange LCD strip from the connector.

    Düzenle

  11. HP iPAQ H2200 faceplate replacement: adım 10, 1 resimden 1.

    • Unscrew the 2 screws located at each top corner of the main board.

    Düzenle

  12. HP iPAQ H2200 faceplate replacement: adım 11, 1 resimden 1.

    • Remove the main board by pushing outward on the two tabs located on each side near the bottom of the device.

    Düzenle

  13. HP iPAQ H2200 faceplate replacement, LCD Screen: adım 12, 1 resimden 1.

    • Unscrew the two bottom screws on LCD screen that were previously located under the main board.

    Düzenle

  14. HP iPAQ H2200 faceplate replacement: adım 13, 2 resimden 1. HP iPAQ H2200 faceplate replacement: adım 13, 2 resimden 2.

    • Press on side tabs to loosen and remove the LCD screen.

    Düzenle

  15. HP iPAQ H2200 faceplate replacement, Faceplates: adım 14, 1 resimden 1.

    • Remove the faceplate by unscrewing the green screw located on the top right of the front faceplate.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

6 tane daha katılımcı ile

Tyler Andrews

Üyelik tarihi: 01/13/10

209 İtibar

5 adet Kılavuz yazıldı

Rozetler: 7

+4 tane daha rozet

Ekip

Cal Poly, Team 4-12, Forte Winter 2010 Cal Poly, Team 4-12, Forte Winter 2010 üyesi

CPSU-FORTE-W10S4G12

3 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 5

Her zaman: 1,498