Ana içeriğe geç

HP w2216h Video Port Board Replacement

Neye ihtiyacın var

  1. HP w2216h Video Port Board Replacement, Screen: adım 1, 1 resimden 1.
    • 'Make sure you are grounded, the power supply is not connected and you are wearing safety goggles.

    • Use the Philips #000 screwdriver to remove the 4 round12mm screws on the back panel.

  2. HP w2216h Video Port Board Replacement: adım 2, 2 resimden 1. HP w2216h Video Port Board Replacement: adım 2, 2 resimden 2.
    • Using a Philips #000 head remove 2 flat 12 mm screws above stand mounting bracket.

    • Using a PH1 Philips head with the 150 mm flexible extension remove 1 Philips head screw under the stand mounting bracket.

    • Stand will easily pull off.

  3. HP w2216h Video Port Board Replacement: adım 3, 3 resimden 1. HP w2216h Video Port Board Replacement: adım 3, 3 resimden 2. HP w2216h Video Port Board Replacement: adım 3, 3 resimden 3.
    • Do not put the metal spudger between the metal and the glass. It needs to go under the bezel and above the metal.

    • Turn monitor so that the screen is facing you.

    • Pry the black bezel from above the metal by placing your metal spudger between the bezel and the metal and twisting the tool slightly.

    • The best places to pry are in the lower left and lower right corners of the black bezel.

  4. HP w2216h Video Port Board Replacement: adım 4, 3 resimden 1. HP w2216h Video Port Board Replacement: adım 4, 3 resimden 2. HP w2216h Video Port Board Replacement: adım 4, 3 resimden 3.
    • Be careful of the wires attaching the power button and the control buttons. Show extreme caution to ensure the button is not damaged.

    • Lift the screen assembly from the plastic housing from the corners.

  5. HP w2216h Video Port Board Replacement: adım 5, 2 resimden 1. HP w2216h Video Port Board Replacement: adım 5, 2 resimden 2.
    • Remove the 4 connectors from the left side of the monitor on the back.

  6. HP w2216h Video Port Board Replacement: adım 6, 3 resimden 1. HP w2216h Video Port Board Replacement: adım 6, 3 resimden 2. HP w2216h Video Port Board Replacement: adım 6, 3 resimden 3.
    • Lift the gray tape of the top of the monitor to expose the ribbon cable.

    • Remove the ribbon cable by sliding the connector towards the center of the screen assembly.

    • Lift the reflective tape next to the gray tape.

  7. HP w2216h Video Port Board Replacement: adım 7, 3 resimden 1. HP w2216h Video Port Board Replacement: adım 7, 3 resimden 2. HP w2216h Video Port Board Replacement: adım 7, 3 resimden 3.
    • Remove the 4 PH1 8mm Philips round screws on the outer edge of the screen's assembly.

    • Lift the screen from the screen assembly.

  8. HP w2216h Video Port Board Replacement, Speakers: adım 8, 1 resimden 1.
    • Remove the tape holding each speakers wire to the screen assembly.

  9. HP w2216h Video Port Board Replacement: adım 9, 2 resimden 1. HP w2216h Video Port Board Replacement: adım 9, 2 resimden 2.
    • Remove the two 8mm Philips #000 head screws on each speaker.

  10. HP w2216h Video Port Board Replacement: adım 10, 2 resimden 1. HP w2216h Video Port Board Replacement: adım 10, 2 resimden 2.
    • Remove the speakers by lifting them vertically from the screen assembly.

  11. HP w2216h Video Port Board Replacement: adım 11, 1 resimden 1.
    • Remove the cables that connects the speakers to the signal output board.

  12. HP w2216h Video Port Board Replacement, Video Port Board: adım 12, 1 resimden 1.
    • Remove the single Phillips #000 head screw above the HDMI port .

  13. HP w2216h Video Port Board Replacement: adım 13, 1 resimden 1.
    • Remove the two 2.5mm hex screws on either side of the VGA port

  14. HP w2216h Video Port Board Replacement: adım 14, 3 resimden 1. HP w2216h Video Port Board Replacement: adım 14, 3 resimden 2. HP w2216h Video Port Board Replacement: adım 14, 3 resimden 3.
    • Remove all 8mm Phillips #000 screws holding the board in place.

    • Remove the ribbon cable towards the bottom of the board by sliding the cable away from the board.

    • Remove both wire busses still on the board.

  15. HP w2216h Video Port Board Replacement: adım 15, 1 resimden 1.
    • Lift the board out of the screen assembly by first pulling the board away from the wall where the ports mount, then upward.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Branflakes222

Üyelik tarihi: 03/25/16

396 İtibar

2 adet Kılavuz yazıldı

Ekip

UMass Dartmouth, Team 1-1, Miles Spring 2016 UMass Dartmouth, Team 1-1, Miles Spring 2016 üyesi

UMASSD-MILES-S16S1G1

4 Üyeler

12 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 6

Her zaman: 443