HTC Desire 816 Front Facing Camera Replacement

Saleena Douangphachanh ve 4 diğer katkıda bulunanlar

En son May 7, 2024 tarihinde güncellendi

Tahmin yok

Orta

Daha İyi Resimler Gerekli

Giriş

1. adıma git

Capturing images is how people retain visible proof of memories being created. This guides purpose is to help the user replace a major key component in a cellular device that gives users the ability to see themselves.

Neye ihtiyacın var

Aletler

Daha fazlasını göster…

Adım 1 Battery

HTC Desire 816 Front Facing Camera Replacement, Battery: adım 1, 1 resimden 1.

Pry open the back panel by inserting the plastic opening tool on the left of the camera. We find this spot the easiest to get the tool under the panel.

Düzenle

Adım 2

Once you get an open spot, with a second plastic opening tool, slide down to the bottom of the phone to free the rest of side.

Düzenle

Adım 3

There is adhesive between the battery and the back panel. Take a nylon spudger to cut through the adhesive.
Be sure to use the correct tool for the job. Metal spudgers can puncture an unprotected battery, potentially causing a fire.

Düzenle

Adım 4

Once all way around the bottom, the panel should be broken free of the adhesive, and the rest of the panel should pop right off.

Düzenle

Adım 5

Insert a nylon spudger at the bottom of the battery and lift up to remove the battery.
Be sure to use the correct tool for the job. Metal spudgers can puncture an unprotected battery, potentially causing a fire.

Düzenle

Adım 6

There is adhesive on the other side of the battery as well, take the nylon spudger used to get off the panel and cut through.

Düzenle

Adım 7

Carefully lift battery backside first to disconnect the white connector.

Düzenle

Adım 8 Front Facing Camera

HTC Desire 816 Front Facing Camera Replacement, Front Facing Camera: adım 8, 1 resimden 1.

Using the T5 screwdriver, unscrew these four screws in order to remove the plastic casing.

Düzenle

Adım 9

Remove the black plastic casing with a plastic opening tool.

Düzenle

Adım 10

Using the PH000 screw driver head, unscrew the one screw that is holding down the mother board. (This screw is located on the left side of the motherboard.)

Düzenle