Ana içeriğe geç

Giriş

This guide demonstrates how to propery remove and replace the front panel of an HTC HD 2.

Parçalar

Hiçbir parça belirtilmedi.

  1. HTC HD 2 Touch Glas Repair
    • HTC HD 2 Touch Glas Repair

  2. Open the back cover and remove the battery.
    • Open the back cover and remove the battery.

  3. Use a small Philips screwdriver to remove the four indicated screws.
    • Use a small Philips screwdriver to remove the four indicated screws.

  4. Use a pry tool along the edges of the device to remove the broken or non-functional screen.
    • Use a pry tool along the edges of the device to remove the broken or non-functional screen.

  5. Carefully pull the flex cable connections. Carefully pull the flex cable connections. Carefully pull the flex cable connections.
    • Carefully pull the flex cable connections.

  6. Danach 3 tesa stripes lösen Using tweezers, release the 3 tesa strips. Using tweezers, release the 3 tesa strips.
    • Danach 3 tesa stripes lösen

    • Using tweezers, release the 3 tesa strips.

  7. Kabel vorsichtig aus dem Kabelschacht ... Carefully remove the cable from its shaft. Carefully remove the cable from its shaft.
    • Kabel vorsichtig aus dem Kabelschacht ...

    • Carefully remove the cable from its shaft.

  8. FLEX FLEX FLEX
    • FLEX

  9. Einzelnd Einzelnd Einzelnd
    • Einzelnd

  10. Flex Flex Flex
    • Flex

  11. Aufklappen Aufklappen Aufklappen
    • Aufklappen

  12. Vorsichtig
    • Vorsichtig

Sonuç

To reassemble your device, follow these instructions in reverse order.

Mark Kruhse

Üyelik tarihi: 10-11-2014

19 İtibar

1 Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 3

Son 7 gün: 4

Son 30 gün: 12

Her zaman: 209