Giriş

The vibrator is easy to find and remove after the housing has been taken off.

Parçalar

Hiçbir parçaya gerek yok.

  1. Carefully pull the rear cover from the back of the phone.
    • Carefully pull the rear cover from the back of the phone.

    • Place a finger beneath the small lip on the left side of the battery.

    Yorum Ekle

  2. Lay the phone down on it's screen.
    • Lay the phone down on it's screen.

    • Lift up on the lip and pull the battery from the phone.

    Yorum Ekle

  3. Free shipping on orders over $20
    Use code BLUEANDBLACK at checkout
    Free shipping on orders over $20
    Use code BLUEANDBLACK
    • Remove the four black 3.5mm T5 screws from the back of the phone.

    Yorum Ekle

    • Insert the flat end of a spudger between the midframe and the display.

    • Slide the spudger along the seam between the frame and the display.

    • Using the spudger for leverage, carefully pry the midframe away from the display assembly.

      • This process will take some effort. Continue to pry slowly and carefully until the frame begins to detach.

    • As it releases, pull the midframe away from the phone.

    • The volume control tab may fall off during removal. It can be easily reattached.

    Yorum Ekle

    • Set the phone down on its screen.

    • Using tweezers, unplug the small vibrator connector from its socket on the motherboard.

    Yorum Ekle

    • Pull the vibrator motor from the phone.

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Nathan Puchalski

Üyelik tarihi: 26-04-2011

813 İtibar

5 adet Kılavuz yazıldı

Takım

Cal Poly, Team 24-55, Amido Spring 2011 Cal Poly, Team 24-55, Amido Spring 2011 üyesi

CPSU-AMIDO-S11S24G55

5 Üyeler

8 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 1

Her zaman: 5,619