Ana içeriğe geç
  1. Use a plastic opening tool to take off the rear panel.
    • Use a plastic opening tool to take off the rear panel.

  2. Use a curved metal spudger to remove  the rear panel.
    • Use a curved metal spudger to remove the rear panel.

    • Always try using a nylon spudger or plastic opening tool first; metal spudgers are not ESD-safe and can potentially damage your device.

  3. Push up to remove the back cover.
    • Push up to remove the back cover.

  4. Remove the earpiece speaker connector using the tweezers. Pry out the speaker using a nylon spudger.
    • Remove the earpiece speaker connector using the tweezers.

    • Pry out the speaker using a nylon spudger.

Sonuç

To reassemble your device, follow these instructions in reverse order.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 192