Giriş

This guide will show you how to remove the front panel.

  1. First remove the back cover of your phone to expose the battery.
    • First remove the back cover of your phone to expose the battery.

    Yorum Ekle

  2. Turn the phone over and remove the battery by using your thumb to push forward on the battery and then lift it.
    • Turn the phone over and remove the battery by using your thumb to push forward on the battery and then lift it.

    Yorum Ekle

    • Take the battery out

    • When reassembling, make sure that the battery contacts match up.

    Yorum Ekle

    • Remove the four 4.9mm T6 Torx screws that secure the back panel to the rest of the phone

    Yorum Ekle

    • Remove the two 4.3mm #00 Phillips screws that secure the back panel to the rest of the phone

    Yorum Ekle

    • Use the plastic opening tool to pry the clips off

    • Insert the plastic opening tool along the seams at different points to it pry up

    • This may require a bit of force. The USB port cover may fall off in this step.

    Yorum Ekle

    • Remove the one 3.3mm #00 screw.

    Yorum Ekle

    • Use your finger or the plastic opening tool to unclip the board.

    • Be aware of the ribbon cable connected to the motherboard inside the phone.

    Yorum Ekle

    • Peel off the yellow piece of tape from the phone

    Yorum Ekle

    • First flip up the retaining flap with your fingernail or a plastic opening tool.

    • Pull on the ribbon cable gently with your fingers

    Yorum Ekle

    • Split apart the motherboard and front panel. Remove the other yellow piece of tape off of the end of the ribbon cable.

    Yorum Ekle

    • Gently pull on the ribbon cable to separate the motherboard.

    Yorum Ekle

    • Remove the four 1.9mm #00 Phillips screws.

    Yorum Ekle

    • Peel back the tape gently with your fingers

    Yorum Ekle

    • Remove the board gently with your fingers

    Yorum Ekle

    • Remove the keys

    Yorum Ekle

    • Using the Plastic Opening Tool, pry out the LCD screen and remove with fingers.

    • Be gentle because the LCD screen is fragile.

    Yorum Ekle

    • Use the Plastic Opening Tool to remove the internal ear speaker.

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Justin Culbertson

Üyelik tarihi: 11-10-2011

8 İtibar

1 Kılavuz yazıldı

Takım

Cal Poly, Team 20-29, Maness Fall 2011 Cal Poly, Team 20-29, Maness Fall 2011 üyesi

CPSU-MANESS-F11S20G29

4 Üyeler

9 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 697