Giriş

If your speaker sounds distorted or muffled, or completely does not work, a broken loudspeaker might be the problem. A new one can be installed using this guide.

  1. Power off your device. Remove the bottom cover by sliding it off. Remove the bottom cover by sliding it off.
    • Power off your device.

    • Remove the bottom cover by sliding it off.

  2. Remove the SIM card.
    • Remove the SIM card.

    • Remove the four screws securing the bottom casing.

      • Two 3.0 mm Phillips #0 screws in the top left and right corners.

      • Two 2.0 mm Phillips #0 screws in the bottom left and right corners.

  3. Pro Tech Toolkit içeren veya $100,00tüm siparişlerde ücretsiz kargo!

    Mağazamıza Göz Atın
  4. Remove the 2.0 mm Phillips #0 screws on either side of the phone. Remove the 2.0 mm Phillips #0 screws on either side of the phone.
    • Remove the 2.0 mm Phillips #0 screws on either side of the phone.

  5. Use a plastic opening tool to pry open the bottom casing. Remove the bottom casing by pulling it towards you. Remove the bottom casing by pulling it towards you.
    • Use a plastic opening tool to pry open the bottom casing.

    • Remove the bottom casing by pulling it towards you.

  6. Using a plastic opening tool, peel off the speaker cover. Using a plastic opening tool, peel off the speaker cover.
    • Using a plastic opening tool, peel off the speaker cover.

  7. Use the spudger to push the speaker out of its casing.
    • Use the spudger to push the speaker out of its casing.

Sonuç

To reassemble your device, follow these instructions in reverse order.

abebe alemu

Üyelik tarihi: 20-01-2015

101 İtibar

1 Kılavuz yazıldı

Takım

USF Tampa, Team 1-3, Blackwell Winter 2015 USF Tampa, Team 1-3, Blackwell Winter 2015 üyesi

USFT-BLACKWELL-W15S1G3

4 Üyeler

8 adet Kılavuz yazıldı

0 Yorum

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 3

Her zaman: 352