Eşyalarını Tamir Et Topluluk Mağaza

Bu kılavuzda güncel değişiklikler var. En son onaylanmamış sürüme geçin.

Hair Dryer Button Switchboard Replacement

Neye ihtiyacın var

  1. Hair Dryer Button Switchboard Replacement, Nozzle: adım 1, 2 resimden 1. Hair Dryer Button Switchboard Replacement, Nozzle: adım 1, 2 resimden 2.

    • Remove the black air concentrating nozzle by gently twisting and pulling the nozzle.

    • If nozzle is not attached, skip to next step.

    Düzenle

  2. Hair Dryer Button Switchboard Replacement, Grating: adım 2, 1 resimden 1.

    • Using a screwdriver, remove the screw located underneath the air concentrating nozzle. This screw attaches the hair dryer body to the hair dryer grating.

    • For most hair dryers, use a Phillips #1 screwdriver. For hair dryers with smaller screws, consider using a Phillips #00 screwdriver.

    Düzenle

  3. Hair Dryer Button Switchboard Replacement: adım 3, 1 resimden 1.

    • Detach the hair dryer grating from the body by gently twisting the grating from side to side.

    Düzenle

  5. Hair Dryer Button Switchboard Replacement: adım 4, 1 resimden 1.

    • Separate the hair dryer grating into the three pieces seen in the image.

    Düzenle

  6. Hair Dryer Button Switchboard Replacement, Button Switchboard: adım 5, 1 resimden 1.

    • Using a Phillips #1 Screwdriver, remove the screws located on the hair dryer handle.

    Düzenle

  7. Hair Dryer Button Switchboard Replacement: adım 6, 1 resimden 1.

    • Using a plastic opening tool, carefully remove the front face of the hair dryer plastic case.

    Düzenle

  8. Hair Dryer Button Switchboard Replacement: adım 7, 1 resimden 1.

    • The hair dryer is now disassembled. The fan, motor, heating element cover, and internal wiring are exposed.

    • Identify the turbo button.

    • Identify the button switchboard.

    Düzenle

  9. Hair Dryer Button Switchboard Replacement: adım 8, 1 resimden 1.

    • Gently pull the turbo button away from the hair dryer body.

    • If the turbo setting is still not working after you replace the switchboard, consider using soldering techniques to replace the turbo button .

    Düzenle

  10. Hair Dryer Button Switchboard Replacement: adım 9, 1 resimden 1.

    • Gently pull the button switchboard away from the hair dryer body.

    • Using a desoldering wick and a soldering iron, desolder the wires.

    • Refer to the following page for desoldering instructions: Soldering Skills

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Yazar

11 tane daha katılımcı ile

Mitch

Üyelik tarihi: 10/04/12

34 İtibar

5 adet Kılavuz yazıldı

Rozetler: 9

+6 tane daha rozet

Ekip

Cal Poly, Team 24-29, Regan Fall 2012 Cal Poly, Team 24-29, Regan Fall 2012 üyesi

CPSU-REGAN-F12S24G29

5 Üyeler

6 adet Kılavuz yazıldı

Bir Yorum

I have a hairdryer with loose wire. Can you help me to find where the wire should be welded?

ziad musa - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 13

Son 30 gün: 64

Her zaman: 8,331