Parçalar

Hiçbir parçaya gerek yok.

  1. Identify the black air concentrating nozzle.
    • Identify the black air concentrating nozzle.

    Yorum Ekle

  2. Remove the black air concentrating nozzle by gently twisting and pulling the nozzle.
    • Remove the black air concentrating nozzle by gently twisting and pulling the nozzle.

    Yorum Ekle

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Using a screwdriver, remove the screw located underneath the air concentrating nozzle. This screw attaches the hair dryer body to the hair dryer grating.

    • The purpose of this guide is to demonstrate the repair steps for a generic hair dryer. We do not specify screw sizes because screw sizes can differ between hair dryers. For most hair dryers, use a Phillips #1 Screwdriver. For hair dryers with smaller screws, consider using a Phillips #00 Screwdriver.

    Yorum Ekle

    • Detach the hair dryer grating from the body by gently twisting the grating from side to side.

    Yorum Ekle

    • Separate the hair dryer grating into the three pieces seen in the image.

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Mitch

Üyelik tarihi: 04-10-2012

31 İtibar

5 adet Kılavuz yazıldı

Takım

Cal Poly, Team 24-29, Regan Fall 2012 Cal Poly, Team 24-29, Regan Fall 2012 üyesi

CPSU-REGAN-F12S24G29

5 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 3

Son 30 Gün: 19

Her zaman: 1,461