Eşyalarını Tamir Et Topluluk Mağaza

Hamilton Beach Food Processor 70740 Motor/Cord Replacement

Arşivlenmiş Kılavuz
Bu kılavuz sadece arşivsel amaçlarla muhafaza edilmiştir. Onarımınızı gerçekleştirmek için kılavuzun güncel halini kullanın.

Giriş

This procedure requires a moderate level of electrical wiring experience, and a few listed tools.

Neye ihtiyacın var

  1. Dikkatli ol: adımlar 1-5 yapım altında olarak işaretlenen bir kılavuzdan alınmıştır.

    Hamilton Beach Food Processor 70740 Motor/Cord Replacement, Base Removal: adım 1, 3 resimden 1. Hamilton Beach Food Processor 70740 Motor/Cord Replacement, Base Removal: adım 1, 3 resimden 2. Hamilton Beach Food Processor 70740 Motor/Cord Replacement, Base Removal: adım 1, 3 resimden 3.

    • Hold the food processor upside down and remove the two screws indicated with a screwdriver. Once unscrewed, remove the two rubber suction pads.

    Düzenle

  2. Hamilton Beach Food Processor 70740 Motor/Cord Replacement: adım 2, 2 resimden 1. Hamilton Beach Food Processor 70740 Motor/Cord Replacement: adım 2, 2 resimden 2.

    • Use a spudger to remove the 4 rubber base pads located at the corners of the device.

    Düzenle

  3. Hamilton Beach Food Processor 70740 Motor/Cord Replacement: adım 3, 1 resimden 1.

    • Unscrew all 4 screws that are located beneath the pads with a screwdriver and remove the plastic grey base.

    Düzenle

  5. Hamilton Beach Food Processor 70740 Motor/Cord Replacement: adım 4, 1 resimden 1.

    • Remove the screws indicated with a screw driver.

    Düzenle

  6. Hamilton Beach Food Processor 70740 Motor/Cord Replacement: adım 5, 1 resimden 1.

    • Remove the two screws behind the knob with a screwdriver.

    Düzenle

  7. Hamilton Beach Food Processor 70740 Motor/Cord Replacement, Motor/Cord: adım 6, 1 resimden 1.

    • Use a regular nylon spudger to remove the plastic caps at these locations with moderate pressure.

    • When working with electronics, it's important to choose a tool that's ESD-safe to avoid accidental damage to the device. The regular black nylon spudger or a plastic opening tool should be used whenever possible.

    • Apply pressure at the edge of the plastic cap circles. Apply stress elsewhere may damage the device.

    • Note that the plastic caps are glued

    Düzenle

  8. Hamilton Beach Food Processor 70740 Motor/Cord Replacement: adım 7, 1 resimden 1.

    • Remove the 4 screws located under the plastic caps with a screw driver.

    Düzenle

  9. Hamilton Beach Food Processor 70740 Motor/Cord Replacement: adım 8, 2 resimden 1. Hamilton Beach Food Processor 70740 Motor/Cord Replacement: adım 8, 2 resimden 2.

    • Lift and remove the plastic gears at the center of the device.

    • Remove any grease residue underneath the plastic gears.

    Düzenle

  10. Hamilton Beach Food Processor 70740 Motor/Cord Replacement: adım 9, 2 resimden 1. Hamilton Beach Food Processor 70740 Motor/Cord Replacement: adım 9, 2 resimden 2.

    • Remove the remaining screws to unhinge the motor located at the center of the device using a screw driver.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Yazar

4 tane daha katılımcı ile

David Gedeon

Üyelik tarihi: 09/17/15

806 İtibar

6 adet Kılavuz yazıldı

Rozetler: 10

+7 tane daha rozet

Ekip

IUPUI, Team 1-1, Baechle Fall 2015 IUPUI, Team 1-1, Baechle Fall 2015 üyesi

IUPUI-BAECHLE-F15S1G1

4 Üyeler

8 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 222