Eşyalarını Tamir Et Topluluk Mağaza

Hamilton-T1 Air Intake and Fan Filter Replacement

Tıbbi Ekipman
iFixit de, bu onarım kılavuzu da tıbbi cihaz üreticisi tarafından onaylanmış değildir ya da herhangi birinin üreticiyle alâkası yoktur.

Giriş

This guide was created to assist in either the replacement or maintenance of the various filters contained within the ventilator. Regular checks and maintenance will allow for smooth operation of the ventilator.

NOTES:

  • The side fan filter and rear intake filter can be replaced or washed with soap and water before reuse
  • The HEPA filter must be replaced

Neye ihtiyacın var

  1. Hamilton-T1 Air Intake and Fan Filter Replacement, Air Intakes and HEPA Filter: adım 1, 1 resimden 1.

    • The fan filter is located on the side of the ventilator and can be removed and replaced by hand.

    Düzenle

  2. Hamilton-T1 Air Intake and Fan Filter Replacement: adım 2, 1 resimden 1.

    • The air intake filter is located on the rear of the device, and can also be removed by hand.

    Düzenle

  3. Hamilton-T1 Air Intake and Fan Filter Replacement: adım 3, 1 resimden 1.

    • To access the HEPA filter, first remove the screw holding the filter cover in place and gently remove the cover.

    Düzenle

  4. Hamilton-T1 Air Intake and Fan Filter Replacement: adım 4, 1 resimden 1.

    • The HEPA filter can now be removed by hand.

    • Install a new HEPA filter and reattach the back panel.

    • Be sure to test the device and ensure airflow through all filters before use.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

2 tane daha katılımcı ile

Trevor Foley

Üyelik tarihi: 04/10/20

114 İtibar

1 Kılavuz yazıldı

Rozetler: 3

Ekip

Cal Poly, Team S11-G24, Paton Spring 2020 Cal Poly, Team S11-G24, Paton Spring 2020 üyesi

CPSU-PATON-S20S11G24

3 Üyeler

3 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 2

Son 30 gün: 12

Her zaman: 597