Giriş

Use this guide to replace the Motherboard.

Parçalar

Hiçbir parçaya gerek yok.

Remove the outer screen cover by releasing  the top clip from the main body of the device.
  • Remove the outer screen cover by releasing the top clip from the main body of the device.

Yorum Ekle

Pull out the stylus from the top right corner of the device.
  • Pull out the stylus from the top right corner of the device.

Yorum Ekle

  • Slide the memory cartridge cover up and off the device.

Yorum Ekle

  • Remove the battery cover by releasing the clip from the main body of the device.

Yorum Ekle

  • Remove the batteries from the device.

Yorum Ekle

  • Unscrew the four 2.94mm screws with a #00 Phillips screwdriver.

  • One end of the OEM stylus can unscrew and contains a mini #00 Phillips screwdriver.

Yorum Ekle

  • Use the spudger to pry open the casing by applying pressure at 4 clips on both sides of the device.

  • Be careful while opening the casing as there is a flex strip connecting the two halves.

Yorum Ekle

  • Disconnect the flex strip from the motherboard with tweezers.

Yorum Ekle

  • Use tweezers to remove the power button from the back case.

Yorum Ekle

  • Disconnect the button pad by using the spudger to pry it off the motherboard.

  • Remove the button pad.

Yorum Ekle

  • Unscrew the two 2.94mm Phillips #00 screws that hold the motherboard in place.

Yorum Ekle

  • Use the spudger to lift the motherboard from the case.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

David Faltemier

Üyelik tarihi: 20-06-2012

19 İtibar

5 adet Kılavuz yazıldı

Takım

Cal Poly, Team 1-2, Regan SU 2012 Cal Poly, Team 1-2, Regan SU 2012 üyesi

CPSU-REGAN-SU12S1G2

4 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 1

Her zaman: 699