Giriş

The only tool needed is a #00 Phillips Screw driver.

Parçalar

Hiçbir parçaya gerek yok.

Remove the six 4.1 mm Phillips screws from the back plate using the #00 Phillips Scewdriver.
  • Remove the six 4.1 mm Phillips screws from the back plate using the #00 Phillips Scewdriver.

Yorum Ekle

Remove the black plate from the PDA.
  • Remove the black plate from the PDA.

Yorum Ekle

Remove four 2.6 mm Philips screws that are on the sides of the frame. Remove the remaining 3.9 mm Philips screw holding together the stylus holster and the frame.
  • Remove four 2.6 mm Philips screws that are on the sides of the frame.

  • Remove the remaining 3.9 mm Philips screw holding together the stylus holster and the frame.

Yorum Ekle

Remove the four 2.6 mm Philips screws on the top and bottom of the frame. Remove the four 2.6 mm Philips screws on the top and bottom of the frame.
  • Remove the four 2.6 mm Philips screws on the top and bottom of the frame.

Yorum Ekle

Remove the white frame from the PDA.
  • Remove the white frame from the PDA.

  • The frame may get stuck on the corners so be very gentle when working the corners off.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Nick Lazarakis

Üyelik tarihi: 23-01-2011

331 İtibar

3 adet Kılavuz yazıldı

Takım

Cal Poly, Team 11-28, Maness Winter 2011 Cal Poly, Team 11-28, Maness Winter 2011 üyesi

CPSU-MANESS-W11S11G28

4 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Tüm Zamanlar: 909