Ana içeriğe geç

Handspring Visor Edge Back Panel Replacement

Neye ihtiyacın var

  1. Handspring Visor Edge Back Panel Replacement, Back Panel: adım 1, 1 resimden 1.
    • Remove the six 4.1 mm Phillips screws from the back plate using the #00 Phillips Scewdriver.

  2. Handspring Visor Edge Back Panel Replacement: adım 2, 1 resimden 1.
    • Remove the gray back plate from the PDA.

  3. Handspring Visor Edge Back Panel Replacement: adım 3, 2 resimden 1. Handspring Visor Edge Back Panel Replacement: adım 3, 2 resimden 2.
    • Remove the four 2.6 mm Philips screws that are on the sides of the frame.

    • Remove the 3.9 mm Philips screw holding the stylus holster to the frame.

  4. Handspring Visor Edge Back Panel Replacement: adım 4, 2 resimden 1. Handspring Visor Edge Back Panel Replacement: adım 4, 2 resimden 2.
    • Remove the four 2.6 mm Philips screws on the top and bottom of the frame.

  5. Handspring Visor Edge Back Panel Replacement: adım 5, 1 resimden 1.
    • Gently remove the white frame from the back of the PDA.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Nick Lazarakis

Üyelik tarihi: 01/23/11

331 İtibar

3 adet Kılavuz yazıldı

Ekip

Cal Poly, Team 11-28, Maness Winter 2011 Cal Poly, Team 11-28, Maness Winter 2011 üyesi

CPSU-MANESS-W11S11G28

4 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 3

Her zaman: 1,097