Parçalar

Hiçbir parçaya gerek yok.

Place Visor Edge face down. Notice the tab connecting the flip cover to the back of the PDA.
  • Place Visor Edge face down.

  • Notice the tab connecting the flip cover to the back of the PDA.

  • Gently push tab forward.

  • Do not pull on the flip cover to try and remove it from the PDA.

Yorum Ekle

Once flip cover is removed, turn over and remove the four 3.9 mm screws connecting the hinge.
  • Once flip cover is removed, turn over and remove the four 3.9 mm screws connecting the hinge.

Yorum Ekle

Gently pull away the plastic hinge from the cover. Be careful to pull out evenly and not bend the plastic, as it can crack.The spring may also shoot out if it is not pulled out evenly.
  • Gently pull away the plastic hinge from the cover.

  • Be careful to pull out evenly and not bend the plastic, as it can crack.The spring may also shoot out if it is not pulled out evenly.

Yorum Ekle

Turn the hinge piece on its side or use a screwdriver to pull out the spring.
  • Turn the hinge piece on its side or use a screwdriver to pull out the spring.

  • Reinsert new spring.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Blaize Steiger

Üyelik tarihi: 30-01-2011

101 İtibar

1 Kılavuz yazıldı

Takım

Cal Poly, Team 11-28, Maness Winter 2011 Cal Poly, Team 11-28, Maness Winter 2011 üyesi

CPSU-MANESS-W11S11G28

4 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 955