Eşyalarını Tamir Et Topluluk Mağaza

Hannspree SN12E2 IO Board Replacement

Neye ihtiyacın var

  1. Hannspree SN12E2 IO Board Replacement, Battery: adım 1, 1 resimden 1.

    • Unplug and power off your laptop.

    Düzenle

  2. Hannspree SN12E2 IO Board Replacement: adım 2, 1 resimden 1.

    • Close your laptop .

    • Place your laptop face down on a flat surface.

    Düzenle

  3. Hannspree SN12E2 IO Board Replacement: adım 3, 3 resimden 1. Hannspree SN12E2 IO Board Replacement: adım 3, 3 resimden 2. Hannspree SN12E2 IO Board Replacement: adım 3, 3 resimden 3.

    • Unlatch the lock on the top right of your laptop first.

    • You will need to pull on the lock on the left side and remove the battery at the same time

    • The left lock is a spring lock and needs constant pressure applied in order to stay open.

    Düzenle

  4. Hannspree SN12E2 IO Board Replacement, Touchpad Plane/Keyboard: adım 4, 1 resimden 1.

    • Remove all the 5mm PH0 screws on the back cover

    Düzenle

  5. Hannspree SN12E2 IO Board Replacement: adım 5, 3 resimden 1. Hannspree SN12E2 IO Board Replacement: adım 5, 3 resimden 2. Hannspree SN12E2 IO Board Replacement: adım 5, 3 resimden 3.

    • Gently pry the case apart starting at the lower right corner using the small spudger

    • Move around the case gently prying until the touchpad plane is free from the rest of the case

    Düzenle

  7. Hannspree SN12E2 IO Board Replacement: adım 6, 2 resimden 1. Hannspree SN12E2 IO Board Replacement: adım 6, 2 resimden 2.

    • Gently lift up on the touchpad portion of the touchpad plane

    • Unplug the ZIFF connector by pulling gently on the black retaining blade and removing the white flat flex cable

    • Pull the touchpad away from the rest of the case

    Düzenle

  8. Hannspree SN12E2 IO Board Replacement: adım 7, 1 resimden 1.

    • Gently lift up on the loose keyboard to expose the ZIFF connector.

    • Unplug the keyboard ZIFF following the same instructions as the touchpad ZIFF

    Düzenle

  9. Hannspree SN12E2 IO Board Replacement, Hard Drive Access Door: adım 8, 1 resimden 1.

    • Remove the three 3mm Phillips #0 screws.

    Düzenle

  10. Hannspree SN12E2 IO Board Replacement: adım 9, 1 resimden 1.

    • Gently pull on the access panel to remove it.

    Düzenle

  11. Hannspree SN12E2 IO Board Replacement, Hard Drive: adım 10, 1 resimden 1.

    • Remove the four 4mm Phillips #0 retaining screws.

    • The hard drive caddy is the large piece of metal with black circles.

    Düzenle

  12. Hannspree SN12E2 IO Board Replacement: adım 11, 1 resimden 1.

    • Next, lift up the hard drive and pull towards you. Lift up the end of the hard drive that is not plugged into the computer.

    Düzenle

  13. Hannspree SN12E2 IO Board Replacement: adım 12, 2 resimden 1. Hannspree SN12E2 IO Board Replacement: adım 12, 2 resimden 2.

    • Slide your hard drive out of the metal piece by unscrewing the sides.

    Düzenle

  14. Hannspree SN12E2 IO Board Replacement, IO Board: adım 13, 1 resimden 1.

    • Remove the three 3mm PH0 screws holding the IO board to the case.

    Düzenle

  15. Hannspree SN12E2 IO Board Replacement: adım 14, 3 resimden 1. Hannspree SN12E2 IO Board Replacement: adım 14, 3 resimden 2. Hannspree SN12E2 IO Board Replacement: adım 14, 3 resimden 3.

    • Unplug the three JST connectors connecting the IO board to the motherboard.

    • For each connector, remove by gently pulling parallel to the connector housing until the connector becomes undone

    • When replacing the connectors ensure that they are oriented correctly. The housing is keyed to prevent the connectors from being plugged in backwards.

    Düzenle

  16. Hannspree SN12E2 IO Board Replacement: adım 15, 1 resimden 1.

    • Remove IO Board by gently tilting it toward the outer edge of the case.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

3 tane daha katılımcı ile

jacob

Üyelik tarihi: 03/25/19

150 İtibar

1 Kılavuz yazıldı

Rozetler: 4

+1 tane daha rozet

Ekip

UMass Dartmouth, Team S2-G2, Simcock Spring 2019 UMass Dartmouth, Team S2-G2, Simcock Spring 2019 üyesi

UMASSD-SIMCOCK-S19S2G2

4 Üyeler

9 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 2

Son 30 gün: 3

Her zaman: 111