Ana içeriğe geç

Hannspree SN12E2 Speaker Replacement

Neye ihtiyacın var

  1. Hannspree SN12E2 Speaker Replacement, Battery: adım 1, 1 resimden 1.
    • Unplug and power off your laptop.

  2. Hannspree SN12E2 Speaker Replacement: adım 2, 1 resimden 1.
    • Close your laptop .

    • Place your laptop face down on a flat surface.

  3. Hannspree SN12E2 Speaker Replacement: adım 3, 3 resimden 1. Hannspree SN12E2 Speaker Replacement: adım 3, 3 resimden 2. Hannspree SN12E2 Speaker Replacement: adım 3, 3 resimden 3.
    • Unlatch the lock on the top right of your laptop first.

    • You will need to pull on the lock on the left side and remove the battery at the same time

    • The left lock is a spring lock and needs constant pressure applied in order to stay open.

  4. Hannspree SN12E2 Speaker Replacement, Touchpad Plane/Keyboard: adım 4, 1 resimden 1.
    • Remove all the 5mm PH0 screws on the back cover

  5. Hannspree SN12E2 Speaker Replacement: adım 5, 3 resimden 1. Hannspree SN12E2 Speaker Replacement: adım 5, 3 resimden 2. Hannspree SN12E2 Speaker Replacement: adım 5, 3 resimden 3.
    • Gently pry the case apart starting at the lower right corner using the small spudger

    • Move around the case gently prying until the touchpad plane is free from the rest of the case

  6. Hannspree SN12E2 Speaker Replacement: adım 6, 2 resimden 1. Hannspree SN12E2 Speaker Replacement: adım 6, 2 resimden 2.
    • Gently lift up on the touchpad portion of the touchpad plane

    • Unplug the ZIFF connector by pulling gently on the black retaining blade and removing the white flat flex cable

    • Pull the touchpad away from the rest of the case

  7. Hannspree SN12E2 Speaker Replacement: adım 7, 1 resimden 1.
    • Gently lift up on the loose keyboard to expose the ZIFF connector.

    • Unplug the keyboard ZIFF following the same instructions as the touchpad ZIFF

  8. Hannspree SN12E2 Speaker Replacement, Speaker: adım 8, 2 resimden 1. Hannspree SN12E2 Speaker Replacement, Speaker: adım 8, 2 resimden 2.
    • Remove the two screws on the speakers.

  9. Hannspree SN12E2 Speaker Replacement: adım 9, 1 resimden 1.
    • Gently remove the JST connector by pulling parallel to the housing .

    • When replacing the connectors ensure that they are oriented correctly. The housing is keyed to prevent the connectors from being plugged in backwards.

  10. Hannspree SN12E2 Speaker Replacement: adım 10, 1 resimden 1.
    • Repeat same steps for other speaker if necessary.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Tim Chase

Üyelik tarihi: 03/25/19

360 İtibar

3 adet Kılavuz yazıldı

Ekip

UMass Dartmouth, Team S2-G2, Simcock Spring 2019 UMass Dartmouth, Team S2-G2, Simcock Spring 2019 üyesi

UMASSD-SIMCOCK-S19S2G2

4 Üyeler

9 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 115