Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

Giriş

Replacing the hard drive on this device is quite easy as all of the components are accessible by removing a single cover.

  1. First, turn off your laptop, then disconnect the power supply. Unplug any peripheral devices connected to your laptop.
    • First, turn off your laptop, then disconnect the power supply. Unplug any peripheral devices connected to your laptop.

    • Next, remove the battery from the laptop.

    • In the picture, the battery is not installed.

  2. Next, remove the 4 Phillips screws from the service door cover (circled in red). In this photo, the screws have already been removed.
    • Next, remove the 4 Phillips screws from the service door cover (circled in red).

    • In this photo, the screws have already been removed.

  3. TÜM SEKMELERİ AÇ

    Mac için RAM Yükseltme Kit'leri

    Kit Satın Al

    Tüm Sekmeler İçin Yeterli RAM

    Kit Satın Al
  4. Remove the 4 screws circled in red in the photo. Once the screws are removed, slide the hard drive to the right, with the help of the tab.
    • Remove the 4 screws circled in red in the photo.

    • Once the screws are removed, slide the hard drive to the right, with the help of the tab.

  5. Remove the 4 screws located on the side of the support. Then, remove the hard drive form its metallic support. Finally, replace de hard drive with a new one or an SSD.
    • Remove the 4 screws located on the side of the support.

    • Then, remove the hard drive form its metallic support.

    • Finally, replace de hard drive with a new one or an SSD.

Sonuç

To reassemble your device, follow these steps in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Bu çevirmenlere özel teşekkürler:

100%

Bu çevirmenler dünyayı onarmamıza yardım ediyor! Katkıda bulunmak ister misiniz?
Çeviriye Başlayın ›

Brendan

Üyelik tarihi: 24-09-2016

17.101 İtibar

1 Kılavuz yazıldı

3 Yorum

why do you do this?

Carl Jefferson - Yanıt

You can do this to replace a faulty hard-drive or replace it by a SSD to get better performance. So I did this to replace mine by a new one and I wrote this guide for other people who search how to do it. As you can see, very easy to do.

Brendan -

Amazing tutorial, thanks :)

Jérémy Martin - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 9

Her zaman: 714