Eşyalarını Tamir Et Topluluk Mağaza

Harman Kardon Onyx Studio 2 Circuit Board Replacement

Giriş

If you have looked at the troubleshooting page and identified that your issues with your Onyx Studio 2 are indeed due to the circuit board being bad, this guide will walk you through how to replace it.

Neye ihtiyacın var

  1. Harman Kardon Onyx Studio 2 Circuit Board Replacement, Front Panel: adım 1, 3 resimden 1. Harman Kardon Onyx Studio 2 Circuit Board Replacement, Front Panel: adım 1, 3 resimden 2. Harman Kardon Onyx Studio 2 Circuit Board Replacement, Front Panel: adım 1, 3 resimden 3.

    • Using a plastic opening tool, pry off the front grill by wedging it in the notch on the front of the device.

    Düzenle

  2. Harman Kardon Onyx Studio 2 Circuit Board Replacement: adım 2, 2 resimden 1. Harman Kardon Onyx Studio 2 Circuit Board Replacement: adım 2, 2 resimden 2.

    • Remove the five 14.4 mm T10 Torx screws.

    Düzenle

  3. Harman Kardon Onyx Studio 2 Circuit Board Replacement: adım 3, 1 resimden 1.

    • Gently pull the front apart from the back.

    Düzenle

  5. Harman Kardon Onyx Studio 2 Circuit Board Replacement: adım 4, 2 resimden 1. Harman Kardon Onyx Studio 2 Circuit Board Replacement: adım 4, 2 resimden 2.

    • Remove the four wires connecting the front and back panels.

    • Pinch the connector tab and pull gently upwards.

    • Repeat for the other three connectors.

    Düzenle

  6. Harman Kardon Onyx Studio 2 Circuit Board Replacement, Control Board: adım 5, 1 resimden 1.

    • Pull the silicone button band off of the outer edge of the speaker.

    Düzenle

  7. Harman Kardon Onyx Studio 2 Circuit Board Replacement: adım 6, 2 resimden 1. Harman Kardon Onyx Studio 2 Circuit Board Replacement: adım 6, 2 resimden 2.

    • Disconnect the two pressure connections from the circuit board.

    Düzenle

  8. Harman Kardon Onyx Studio 2 Circuit Board Replacement: adım 7, 2 resimden 1. Harman Kardon Onyx Studio 2 Circuit Board Replacement: adım 7, 2 resimden 2.

    • Gently remove the control board band by placing fingers in contact with it through the button openings.

    • Work from the outer edges in so as not to bend the band.

    Düzenle

  9. Harman Kardon Onyx Studio 2 Circuit Board Replacement, Circuit Board: adım 8, 2 resimden 1. Harman Kardon Onyx Studio 2 Circuit Board Replacement, Circuit Board: adım 8, 2 resimden 2.

    • Disconnect the remaining connectors from the circuit board.

    • Disconnect the Bluetooth antenna.

    Düzenle

  10. Harman Kardon Onyx Studio 2 Circuit Board Replacement: adım 9, 2 resimden 1. Harman Kardon Onyx Studio 2 Circuit Board Replacement: adım 9, 2 resimden 2.

    • Remove the four 10 mm T10 Torx screws.

    • Pull the circuit board out of the device as it is now free.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

11 farklı kişi bu kılavuzu tamamladı.

Yazar

3 tane daha katılımcı ile

Alexandra Achtenberg

Üyelik tarihi: 02/02/17

2.046 İtibar

6 adet Kılavuz yazıldı

Rozetler: 16

+13 tane daha rozet

Ekip

USF Tampa, Team 16-5, Blackwell Spring 2017 USF Tampa, Team 16-5, Blackwell Spring 2017 üyesi

USFT-BLACKWELL-S17S16G5

3 Üyeler

24 adet Kılavuz yazıldı

5 Yorum

Where do I get another one

Adrian tlahuel - Yanıt

Where we buy the board?

Eric Therrien - Yanıt

Umm… this was rather anticlimactic. Last step was basically like “and now contemplate your life choices”.

markcendan - Yanıt

Where can I Buy a new hk onix studio Main board?

tecnologia en localizaciòn - Yanıt

My speaker was working great. I just disconnected my phone to make a call, put YouTube back on it was all mumbled & the big button in the back kept pulsing so fast.

Maureen Field - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 8

Son 7 gün: 37

Son 30 gün: 146

Her zaman: 21,661