Hasbro Bop-It Micro Series Battery Replacement

Giriş

There are no previous steps needed. All that is required is a #0 Phillips Screwdriver, (2) fresh AAA batteries, and a few minutes of time.

Unscrew the (2) #4 Phillips head 8 mm screws on the back cover using a Phillips #0 screwdriver. The screws are captured and do not need to be completely removed from the back cover.

The batteries are now accessible. Remove batteries using fingers or plastic spudger.

Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Üyelik tarihi: 09/29/16

139 İtibar

2 adet Kılavuz yazıldı

IUPUI-HARLEY-F16S3G1

3 Üyeler

10 adet Kılavuz yazıldı

uh can you do one for the 2016 bop it