Ana içeriğe geç

Giriş

Is your Cuisinart coffee maker producing cold coffee because the heating element contacts are disconnected? If so, this guide will provide instructions on how to reconnect contacts to the heating element. To complete this task you will need a soldering iron, soldering wire and a T10 driver bit.

Parçalar

Hiçbir parça belirtilmedi.

  1. Flip the coffee maker over so the bottom is facing upwards. Use the screwdriver with size 4 extension with the T10  Torx bit to remove all four 17 mm long screws. Lift the bottom cover off the bottom of the coffee maker.
    • Flip the coffee maker over so the bottom is facing upwards.

    • Use the screwdriver with size 4 extension with the T10 Torx bit to remove all four 17 mm long screws.

    • Lift the bottom cover off the bottom of the coffee maker.

  2. Dizüstü Bilgisayar Bataryaları

    An easy fix for a big power boost.

    Hemen Alışveriş Yapın

    Dizüstü Bilgisayar Bataryaları

    An easy fix for a big power boost.

    Hemen Alışveriş Yapın
  3. If heating element contacts are disconnected, use soldering iron with soldering wire to re-bond the contacts. Solder iron can cause burns if used improperly
    • If heating element contacts are disconnected, use soldering iron with soldering wire to re-bond the contacts.

    • Solder iron can cause burns if used improperly

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Austin Wheaton

Üyelik tarihi: 15-02-2018

577 İtibar

4 adet Kılavuz yazıldı

Takım

UW Stout, Team S8-G1, Ogden Spring 2018 UW Stout, Team S8-G1, Ogden Spring 2018 üyesi

UWSTOUT-OGDEN-S18S8G1

4 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 Gün: 6

Son 30 Gün: 32

Her zaman: 613