Eşyalarını Tamir Et Topluluk Mağaza

Heyday Round Bluetooth Speaker Disassembly

Giriş

This is a step-by-step guide on how to disassemble a Heyday Round Bluetooth Speaker to reveal its inner components. You may need to disassemble this product if there is an issue being caused by something inside the speaker and you need to repair it.

Neye ihtiyacın var

  1. Heyday Round Bluetooth Speaker Disassembly, Heyday Round Bluetooth Speaker: adım 1, 2 resimden 1. Heyday Round Bluetooth Speaker Disassembly, Heyday Round Bluetooth Speaker: adım 1, 2 resimden 2.

    • Use a metal spudger to pry the fabric-covered top off of the speaker.

    Düzenle

  2. Heyday Round Bluetooth Speaker Disassembly: adım 2, 1 resimden 1.

    • Use a Phillips #0 screwdriver to remove the twelve screws around the perimeter of the inner plastic shell.

    Düzenle

  4. Heyday Round Bluetooth Speaker Disassembly: adım 3, 1 resimden 1.

    • Remove the inner shell from the back case.

    • Don't yank or pull the shell case off the bottom case. There are cables connecting the two and they could be damaged if pulled.

    Düzenle

  5. Heyday Round Bluetooth Speaker Disassembly: adım 4, 1 resimden 1.

    • Once the hardware is opened by the screwdriver, both sides of the motherboard will be exposed and ready for any needed repairs.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order, from step 3 to step 1.

Yazar

4 tane daha katılımcı ile

Hunter Brown

Üyelik tarihi: 09/22/22

185 İtibar

1 Kılavuz yazıldı

Rozetler: 3

Ekip

University of North Texas, Team 4-4, Saru Jimmy Fall 2022 University of North Texas, Team 4-4, Saru Jimmy Fall 2022 üyesi

UNT-SARU JIMMY-F22S4G4

4 Üyeler

3 adet Kılavuz yazıldı

0Kılavuz Yorumları

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 4

Son 7 gün: 12

Son 30 gün: 62

Her zaman: 1,643