Ana içeriğe geç

Giriş

High heel elastic strap buckles get worn out after time with constant pulling and plugging of the strap. When the buckle loosens or breaks, it is unable to strap properly causing the heels to be unuseable. Instead of replacing the pair of heels, the strap buckle can be fixed with quick sewing.

Parçalar

Hiçbir parça belirtilmedi.

  1. Cut through the remaining thread of the elastic strap. Remove the strap buckle to adjust the position. This step is only if the elastic strap is still attached by any little thread. If the buckle is already detached, skip to step two.
    • Cut through the remaining thread of the elastic strap.

    • Remove the strap buckle to adjust the position.

    • This step is only if the elastic strap is still attached by any little thread. If the buckle is already detached, skip to step two.

  2. Slide the end of the strap underneath the buckle frame without the center prong. Slide the end of the strap underneath the buckle frame without the center prong.
    • Slide the end of the strap underneath the buckle frame without the center prong.

  3. Lift the center buckle prong vertically and place it into the center of the strap elastic. Lift the center buckle prong vertically and place it into the center of the strap elastic.
    • Lift the center buckle prong vertically and place it into the center of the strap elastic.

  4. Continue pushing the strap elastic down underneath the other side buckle frame.
    • Continue pushing the strap elastic down underneath the other side buckle frame.

  5. Fold the detached elastic strap together with the strap attached to the heel so that both straps are evenly lined up. Fold the detached elastic strap together with the strap attached to the heel so that both straps are evenly lined up.
    • Fold the detached elastic strap together with the strap attached to the heel so that both straps are evenly lined up.

  6. With a threaded needle, sew along the ends of the straps in order to enclose the buckle in place. Avoid poking your fingers with the needle. Avoid poking your fingers with the needle.
    • With a threaded needle, sew along the ends of the straps in order to enclose the buckle in place.

    • Avoid poking your fingers with the needle.

  7. Test out the buckle to ensure it is lined properly and can now strap the heel. Test out the buckle to ensure it is lined properly and can now strap the heel.
    • Test out the buckle to ensure it is lined properly and can now strap the heel.

Bitiş Çizgisi

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 32

Her zaman: 79