Ana içeriğe geç

Giriş

The camera could be broken from a fall or maybe when your screen cracked the camera was damaged as well. This guide will show the steps to easily replace the camera.

  1. Remove the two 3mm screws using a PH00 screwdriver.
    • Remove the two 3mm screws using a PH00 screwdriver.

  2. Use the blue plastic opening tool to gently pry the back case off.
    • Use the blue plastic opening tool to gently pry the back case off.

  3. Lift the tab on the wire ribbon shown here
    • Lift the tab on the wire ribbon shown here

  4. Pull up gently on the camera housing shown on this picture, it is glued in place.
    • Pull up gently on the camera housing shown on this picture, it is glued in place.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Brandon Snodgrass

Üyelik tarihi: 29-01-2015

410 İtibar

4 adet Kılavuz yazıldı

Takım

Clemson, Team 15-8, Shirley Winter 2015 Clemson, Team 15-8, Shirley Winter 2015 üyesi

CLEM-SHIRLEY-W15S15G8

5 Üyeler

12 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 89