Ana içeriğe geç

Hipstreet Equinox 2 Motherboard Replacement

Neye ihtiyacın var

  1. Hipstreet Equinox 2 Motherboard Replacement, Rear Case: adım 1, 1 resimden 1.
    • Remove the two 3mm screws using a PH00 screwdriver.

  2. Hipstreet Equinox 2 Motherboard Replacement: adım 2, 1 resimden 1.
    • Use the blue plastic opening tool to gently pry the back case off.

  3. Hipstreet Equinox 2 Motherboard Replacement, Motherboard: adım 3, 1 resimden 1.
    • Unsolder these wires from the motherboard, it is a good idea to label these wires as you remove them according to the picture to the left.

  4. Hipstreet Equinox 2 Motherboard Replacement: adım 4, 1 resimden 1.
    • Remove contact strips by lifting gently on the clip indicated in this picture, then pulling strip out of the clip.

  5. Hipstreet Equinox 2 Motherboard Replacement: adım 5, 1 resimden 1.
    • Remove the 3.5mm screws located at these locations shown on the picture by using the PH00 screwdriver.

  6. Hipstreet Equinox 2 Motherboard Replacement: adım 6, 1 resimden 1.
    • Gently lift the motherboard out of the tablet, make sure no wires are still caught or attached while you lift the motherboard.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Brandon Snodgrass

Üyelik tarihi: 01/29/15

410 İtibar

4 adet Kılavuz yazıldı

Ekip

Clemson, Team 15-8, Shirley Winter 2015 Clemson, Team 15-8, Shirley Winter 2015 üyesi

CLEM-SHIRLEY-W15S15G8

5 Üyeler

12 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 354