Eşyalarını Tamir Et Topluluk Mağaza

Holmes HEH8031 Power Cord Replacement

Giriş

This guide will show how to safely remove and replace a faulty power cord on the Holmes HEH8031 space heater.

Neye ihtiyacın var

  1. Holmes HEH8031 Power Cord Replacement, Housing: adım 1, 1 resimden 1.

    • Ensure the device is unplugged from the wall outlet.

    Düzenle

  2. Holmes HEH8031 Power Cord Replacement: adım 2, 1 resimden 1.

    • Remove eight 12-mm Phillips #2 screws from the back cover.

    Düzenle

  4. Holmes HEH8031 Power Cord Replacement: adım 3, 2 resimden 1. Holmes HEH8031 Power Cord Replacement: adım 3, 2 resimden 2.

    • Turn heater over so the controls are facing up.

    • Lift the front housing away from the back of the fan and slowly fold the front housing back down to the floor.

    • Internal wires are connected to both halves of the housing. Be careful when separating the housing.

    Düzenle

  5. Holmes HEH8031 Power Cord Replacement, Power Cord: adım 4, 3 resimden 1. Holmes HEH8031 Power Cord Replacement, Power Cord: adım 4, 3 resimden 2. Holmes HEH8031 Power Cord Replacement, Power Cord: adım 4, 3 resimden 3.

    • Decrimp the wire nuts from both wire connections.

    • Remove wire nuts to expose wire strands.

    • Separate all connected wires.

    Düzenle

  6. Holmes HEH8031 Power Cord Replacement: adım 5, 3 resimden 1. Holmes HEH8031 Power Cord Replacement: adım 5, 3 resimden 2. Holmes HEH8031 Power Cord Replacement: adım 5, 3 resimden 3.

    • Pull on the cord from the outside of the heater with great finesse. At the same time, push the cord clamp out of the housing from the inside.

    • Separate the two halves of the cord clamp and remove from cord.

    Düzenle

  7. Holmes HEH8031 Power Cord Replacement: adım 6, 2 resimden 1. Holmes HEH8031 Power Cord Replacement: adım 6, 2 resimden 2.

    • Prepare the replacement cord by cutting the negative branch (black) at least 8 inches shorter than the positive branch (white).

    • Strip at least 3/4 inch of insulation from the cord to expose bare wire.

    • Twist wire ends to form a tight braid.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

3 farklı kişi bu kılavuzu tamamladı.

Yazar

2 tane daha katılımcı ile

Deanna Jack

Üyelik tarihi: 10/12/16

333 İtibar

4 adet Kılavuz yazıldı

Rozetler: 13

+10 tane daha rozet

Ekip

IUPUI, Team 2-1, Baechle Fall 2016 IUPUI, Team 2-1, Baechle Fall 2016 üyesi

IUPUI-BAECHLE-F16S2G1

4 Üyeler

16 adet Kılavuz yazıldı

Bir Yorum

Are there substitute power cord for Holmes HEH8031 power cord replacement?

Terri Allen - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 10

Her zaman: 1,910