Ana içeriğe geç

Holmes HEH8031 Safety Weight Replacement

Neye ihtiyacın var

  1. Holmes HEH8031 Safety Weight Replacement, Housing: adım 1, 1 resimden 1.
    • Ensure the device is unplugged from the wall outlet.

  2. Holmes HEH8031 Safety Weight Replacement: adım 2, 1 resimden 1.
    • Remove eight 12-mm Phillips #2 screws from the back cover.

  3. Holmes HEH8031 Safety Weight Replacement: adım 3, 2 resimden 1. Holmes HEH8031 Safety Weight Replacement: adım 3, 2 resimden 2.
    • Turn heater over so the controls are facing up.

    • Lift the front housing away from the back of the fan and slowly fold the front housing back down to the floor.

    • Internal wires are connected to both halves of the housing. Be careful when separating the housing.

  4. Holmes HEH8031 Safety Weight Replacement, Circuit Board Removal: adım 4, 1 resimden 1.
    • Remove four 12mm Phillips #2 screws from the circuit board.

  5. Holmes HEH8031 Safety Weight Replacement, Safety Weight: adım 5, 2 resimden 1. Holmes HEH8031 Safety Weight Replacement, Safety Weight: adım 5, 2 resimden 2.
    • Remove wires from safety weight, as shown.

    • Pull upward on the blue connectors.

    • If connectors are tough to remove, try wiggling while pulling upward.

  6. Holmes HEH8031 Safety Weight Replacement: adım 6, 1 resimden 1.
    • Unscrew the Phillips #2 10 mm screw from the safety weight on the rear housing panel.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Deanna Jack

Üyelik tarihi: 10/12/16

333 İtibar

4 adet Kılavuz yazıldı

Ekip

IUPUI, Team 2-1, Baechle Fall 2016 IUPUI, Team 2-1, Baechle Fall 2016 üyesi

IUPUI-BAECHLE-F16S2G1

4 Üyeler

16 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 2

Her zaman: 535